Fizik Saddle AirTag Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Apple AirTag Mount for Fizik Saddles
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 31
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions:
- I'd suggest you use ”Weatherproof" Filament to print the Parts from - Don't want the parts to become brittle from UV / the Cold or melt in the heat of the Sun 😁
- Print with the usual Voron recommended 4x Perimeter / 40% Infill Settings.
- Layer Height doesn't really matter but I suggest the usual 0.2mm
- The Parts come prealigned and shouldn't require Supports despite some steep Overhangs.
BOM:
- 4x Voron Style M3 Heat Set Inserts
- 2x M3x35mm Button Head ( or Socket Head ) Cap Screws
- 2x M3x12mm Countersink Screws
Assembly & Installation Instructions:
Install 4x M3 Heat Set Inserts into the Main Body using a Soldering Iron ⬇
Install the Apple AirTag into the Main Body ⬇
Add AirTag Clamp and secure with 2x M3x35mm Button Head ( or Socket Head ) Cap Screws ⬇
( If you decide to “permanently” attach the Assembly using Glue - described in the next Step - these Screws will need to be removed with a suitably long Tool - perhaps even requiring an extension - to retrieve the AirTag for Battery Replacement )
Install Assembly to Seat Post Rails ⬇
( Optionally - Add Plastic Glue to the blue marked Areas to prevent quick removal of the Assembly in case of Theft )
Install 2x M3x12mm Countersunk Screws to finish the Installation ⬇
