Replacement lid opener clip for 15L step on garbage can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement clip for the opening mechanism on the "Type A Stainless steel 15 L step on garbage can".
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
The garbage can lasted 9 years so I shouldn't complain, but a new one costs $60. All that was broken was a tiny plastic clip attached to the opening rod. I glued the pieces back together and copied it in Onshape as best as I could. Printed the resulting STL at high quality .12mm layers, and 100% infill with PLA. No supports needed, but used a 4mm brim. 15 minutes after the print I had the new clip installed and am now happily opening and closing my garbage can with the foot pedal. Seems strong enough so hopefully it will last at least a year then I can happily print another.