1 / 3
Saturn 4 Ultra Ventilation Reducer Pipes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These reducers allow you to install a 75 mm ventilation pipe on your Saturn 4 Ultra 3D printer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
You can use these reducers to install a 75 mm pipe for ventilating the Elegoo Saturn 4 Ultra. I believe the Saturn 4 and Saturn 4 Ultra 16K share the same vent opening size.
The second part features a 90-degree angle, allowing you to adjust the direction of the ventilation pipe as needed.
Printing recommendations:
• Suitable for PLA, ABS, or PETG — use whichever you prefer.
• Layer height: 0.2 mm
• Infill: 15–30%
