1 / 4
Philips Sonicare 5000 / 6000 / 7000 Series Holder Wall Mount — zdjęcie 1
1 / 4

Philips Sonicare 5000 / 6000 / 7000 Series Holder Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to hold only the toothbrush, not the charger, mounted with an adhesive strip

Ocena
5 / 5
Polubienia
10
Pobrania
76
Wydruki
2
Wyświetlenia
377
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

Most available models incorporate the charger, which is not what I wanted as the brush has very good battery life. I have only tested this with 5300, but believe it would work with 5000 / 6000 / 7000 series brushes.

Designed to be economiocal with filament. Has a faux charging pin the middle to centre the brush

Print with PLA or PETG on any printer or settings. I used 0.6mm nozzle and 0.24mm layer height.

Attach to the wall with any foam double sided adhesive - I used command strips.

Tagi