Liczymy pasujące modele…
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…
EN : If it's going to be done, let's do it right! Here's a version for three brush heads. See also V1 and V2 for one and two brush heads, respectively. The individual pillars are numbered to avoid confusion. Material : PLA Layers : 0.2mm…
The original model is visually and functionally amazing, but taking it off the wall to clean or replace it was a pain. I designed this version that is as easy to print and mount but also easily removed from the wall. Use water-resistant…
These brush head holders keep your electric toothbrush heads exactly where they belong: together, organized, and finally not rolling around your bathroom shelf anymore. Available in versions for 1 to 6 brush heads , they let you choose…
Electric toothbrush holder for one Phillips Sonicare and one happybrush toothbrush. You may need to use custom support ("on buildplate only") because the happybrush opening has a quite long bridge. Leave your comments if it works without…
Simple Sonicar Stand (version with glass cup) NO supports needed ************************************************* Einfacher Sonicar halter (Version mit Glasbecher) keine Supports notwendig
Compact travel case designed for Philips Sonicare 6000 and 7000 series toothbrushes , featuring vent holes for airflow and drying , a snap-fit lid , and a hinged design to keep the toothbrush securely contained while traveling. The case…
This model is slotted for the double-sided tape I had on hand. STEP model provided for remix Printed this holder in PLA+ on default settings. The fit is quite tight but it is intentional, no one likes slop, slight scaling may be require.…
Toothbrush holder for Philips Sonicare Designed for Philips Sonicare GU14 6XW but may fit other models.
This wall-mounted shelf is designed specifically for the Philips Sonicare UV sanitizing and charging unit. It allows you to place the device conveniently on the wall, saving valuable counter space in your bathroom while keeping the unit…
This is a universal wall-mounted electric toothbrush holder designed to fit round and oval electric toothbrush handles . Compatible with most models from: Philips Sonicare Oral-B Braun Other electric toothbrushes with similar cylindrical…
The top silicone button on my Sonicare broke near the middle, print in TPU and seal with silicone after clearing out the old buttons. You do not have to remove the internals, but it can make it easier. I reccomend using a variable layer…
Modded version of the original mount made by another user. It has a little more surface area so my double sides tape had a little but more surface, seems to stick to the wall nicely. I included a .f3d file for editing the size in fusion.
Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…
With many toothbrush holders, I find them to be not very versatile and made of a lot of unnecessary material. They are either for classic toothbrushes or electric toothbrushes. You can rarely combine them, and on top of that, you want it…
A design for a holder for two Philips Sonicare toothbrushes. Having twins, a girl and a boy, each has their own toothbrush. Due to their small bases, they kept tipping over. I decided to create a holder that would stabilize the brushes…
WHY/WHAT? Simple gunk barrier for the Sonicare non-oval chargers - works on the Kids version too. It is designed to reduce the water that gets on the charger causing gunk/mold to start to form. HOW? Any material should do. I used PLA to…
Die Wandhalterung ist für das Ladegerät der Sonicare von Philips geeignet und bietet Dazu noch Platz für eine Powerbank. Ich habe als Powerbank Vorlage an einer Fresh 'n Rebel 12000 mAh Powerbank orientiert. Auf Anfrage kann ich gerne…
A simple travel case for the Philips Sonicare 2100 and 3100 electric toothbrush. Uses eight 6x3mm magnets.
I remixed the original to enlarge the opening to hold the toothbrush. Made a little wider as the toothbrush is slightly rounded. Added a square cutout at the back. Added a slight curve to the front to increase the slight added depth.
A minimalistic hat for your sonicare toothbrush so it doesn't scratch or poke your washbag. Printed with a 0.4 nozzle.
Držáka na kartáčky 2x dětský HX63xx + 2x Sonicare ProtctiveClean HX68xx. Pro kompletaci nutný: 1x samožezný šroub průměr 2,5mm délka 12mm pro oporu 3x zápustný šroub M3x14 3x čtvercová maticeM3 Pod nabíječkou je špulka pro navinutí…
EN : Holder for Philips toothbrush with elimination of the stability problem of the brush head support. Material : PLA Layers : 0.1 - 0.2 (0.1 looks better) Supports : no See also:…
This is a remix of @Charleszard Sonicare Wall Mount Charger . I reduced the dimensions of the plug holder to 98% of the original (X and Z dimensions of posted model). This allows the model to hold on to the plug better. Also removed the…
This stand securely holds the Sonicare for Kids Pet Edition (HX3601) charging stand. The bottom is open to promote drainage away from the inductive charging puck and the side strip is designed for a large sized Command Strip. This is not…
Wall mount holder for Philips Sonicare power flosser nozzles. Can be secured with either screws or double sided tape. Should print just fine even with 0.3mm DRAFT profile in PrusaSlicer (0.4 mm nozzle).
As Philips does not provide any possibility to mark toothbrushes I wanted to have a minimal and strongly attached thing. Printed with MK4 and PLA. It fits perfectly. It is tight to put on but then stays where it should.
2x Sonicare and 1x kid brush. I designed this model to allow switching from the kid brush to another Sonicare in the future. You can glue the slide onto the wall and then easily swap the holder for different items.
This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .
Deutsch / German Was ist bloß los bei Philips, dass die bei einer so teuren Zahnbürste keinen Bürstenkopfhalter oder ähnliches mit zum Lieferumfang packen können? Traurig... Jedenfalls habe ich mir eine Station für meine Sonicare mit…
I print it with PLA+ Nozzle size of 0.4mm 0.2mm layer hight
fits a Philips Sonicare 9000 and all models with the same measurements, it a tight fit.
The toothbrush holder is designed for two adult toothbrushes and two children's toothbrushes.
English: This is the family version of the holder. Now, there are 4 slots for toothbrushes and one for a charger. For those who don’t only have Philips Sonicare at home but also Oral-B for the kids, there’s an adapter included…
English: This is the adapter for the holder, designed to fit an Oral-B Pro Kids electric toothbrush. There are 3 versions with different corner designs and two options: with or without a base. The version without a base is more hygienic,…
Für mehr Ordnung im Badezimmer habe ich eine 4er Halterung für die Bürstenköpfe unserer Philips Sonicare modeliert. Um die Halterung leichter reinigen zu können, habe ich sie in eine Wandhalterung und die Bürstenhalterung gespittet. Die…
see images for details
Simple organizer to hold toothbrush heads either upside down or sideways. Two screw holes to fasten to bathroom shelves or walls. Nozzle size - 0.4mm, 0.6mm, or 0.8mm Layer height - 0.4mm Material - PLA
Holder for four toothbrushes & two toothpastes Free standing or use double sided tape (15mm) to hang it on wall
It is a simple holder that allows you to mount the your Philips Sonicare toothbrush charger to the wall. It features a wall to prevent falls and a neat cable storage.
I've made a stand for charger and 4 toothbrush heads for Philips Sonicare. Up to 4 heads can be stored on this stand with a Sonicare toothbrush with semiround charger in the middle (like Philips Clean care/ Protective clean/ Expert clean…
Organizer for Sonicare toothbrushes and other dental cleaning products for large family. Removable inserts can be used to create different configurations to suit your taste. You can print out the legs or buy ready-made self-adhesive legs…
Printed (with PLA on Geeetech A20M) and tested on Sonicare 4300 model. Sliced with Cura using these settings: Layer height: 0.15mm Top/Bottom Layer: 0.9mm Wall thickness: 0.9mm Wall count: 2 Infill: Grid,25%, 0.15mm thickness Ironing:…
Philips Sonicare 3100 Stand for charger and toothpaste Tested with Model HX3673/14 Diameter toothpaste slot: 33mm
YOU LIKE TIDYNESS? And brushing teeth? :D Print my wallmounted Philips Sonicare charger and brush stand! Fits: - Philips charger type: HX6100 (to be found on charger-bottom) - Brushes: Sonicare W2 - May fit various Philips Sonicare…
Neues Modell: Verbesserte Version 6 !! Hier ist wieder ein farbiger MarkerRing für PHILIPS Sensonic Zahnbürsten. Dieses Mal für die günstigen EURODONT Bürstenköpfe von ALDI (Süd). Leider passen auf diese günstigen Köpfe nicht die original…
Hallo, habe hier mal einen Zahnbürstenhalter für 2 Philips Sonicare Schallzahnbürsten mit integriertem Ladegerät Halter. man kann den entweder an die Wand schrauben oder wie in meinem fall mit doppelseitigen Klebeband kleben.
Hallo, habe hier mal einen Zahnbürstenhalter für 3 Philips Sonicare Schallzahnbürsten mit integriertem Ladegerät Halter. man kann den entweder an die Wand schrauben oder wie in meinem fall mit doppelseitigen Klebeband kleben.
Simple stand for two Philips Sonicare Protective Clean toothbrushes.
Don't forget to stop printing and insert M3 square nut. Fits on 25mm tube.
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
Holder/stand to keep your Sonicare toothbrush and toothpaste neatly stored on the counter
This is a travel case for the tooth brush of a Sonicare. There were other cases already available but I wanted one with a threaded cap instead so I modeled this with M24x2 threads on the bottom and cap. I printed in PETG with the cap at…
I haven't found a wall mount for my Philips Sonicare 9900 Prestige toothbrush. So I decided to give it a try and design one myself. I'm quite happy about the result. I took inspiration from Toothbrush + Induction Charger Wall Mount…
The heads are labeled S and L, if you want to change this I have included the fusion file for it. In my 3mf, and the way that I printed mine, uses marble pla as the basis with TPU for ams for the parts that are likely to get wet, and a…
Simple stand for Philips Sonicare and two kind of tooth paste, profile ready for MK4, organic supports, enjoy
This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…
Keep your Philips Sonicare toothbrush clean and organized with this custom 3D-printed holder featuring a dedicated brush extension slot. Designed to prevent mold buildup at the bottom of the toothbrush and the brush extension, it ensures…
Corner holder for 3 Philips sonicare toothbrushes (including the one made for kids) with an integrated charger base. It also has a small space below to hide excess cable and an additional slot for toothpaste. I have just put it in a sink…
Don't want the charger stand. Hence, just removed it.
Simple base to insert the charger for a Sonicare 3100 and to organize your toothbrush and wire.
Remix of Mat3D's model to make it fit 2 toothbrushes, 1 side for Oral B toothbrush and 1 side for Philips Sonicare. In the middle there is place for 3 pieces of toothbrush holders. Printed it PLA or PETG with 20% infill. I did ironing on…
This is a remix of the Sonicare Toothbrush Holder, designed for a cleaner and more secure mounting option. I've added holes for three 5mm round magnets, each 3mm deep, to allow the holder to be magnetically mounted to any compatible…
Simple holder for a family of 5. Two charging spots and three non-charging spots.
Remix of existing model of Philips Sonicare 3100 Stand but with 2 toothbrush instead of 4
This is a collection of 3 toothbrush holders - one for the modern square handle, one for the modern oval handle and one for the kids size brush. There is a separate file for each along with a corresponding drip tray. **Note - the square…
This is a remix from https://www.thingiverse.com/thing:6334258 which is a remix from https://www.printables.com/model/644315-cute-stylized-dinosaur-toothbrush-holder which was a remix from…
Dual Toothbrush stand / holder for Phillips Sonicare + Curaprox interdental brushes (from the set - one square, one round) Also has a slot for Elmex gel (or small toothpaste 10-25ml) OR you can download a model without the slot.…
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
Pour savoir combien de rechange il vous reste ou pour partager une même brosse à dents en famille.
I've designed this for my kids. It fits two Philips Sonicare HX6352 The holes on the top are 37 mm x 37 mm, the diameter of the pin is 5.8 mm. I've printed it on the side, with supports and 10% infill
Use nozzle 0.4mm and backrest with anti slip mat print of anyone flexible material.
This cordless power flosser is a bit of a pain to store because it doesn't come with a stand and you want to separate the parts so they dry properly in-between uses. So I made one :) The reservoir is stored upside down to aid drying and…
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Simply slide over the top of the charger. Knobs for the toothbrush heads might have to be glued or the stems…
Philips sonicare charger HX6100 Skadis toothbrush hanger Printed with normal auto generated supports (don't try tree support trust me) 75% gyroid infill, 6 wall loops, printed using outer brim but im not sure its necessary fits every…
Remix for the 5300 series (HX710B). It fits tightly so that it does not rattle. Printed on Bambulab A1 with PETG. 0.2mm layer height with 0.4 nozzle.
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Three variants for the cable exit direction: on the left, in the centre and on the right. Simply slide over…
Recommended ironing of top surface (front of finished print).
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
Die Station wurde in Pla auf dem Prusa MK4S gedruckt. Andere Filamente wie PETG und ABS funktionieren natürlich auch. Die Anti-rutsch Unterlagen sind in TPU gedruckt. Verwendet wurde eine Schichthöhe von 0.25mm, 15% Infill und…
Doporučení původního modelu: Doporučuji tisknout s límcem, minimálně 10% vynucením podpěr, na 2 a více perimetrů, o nejméně 15%-ní gyroidové výplni z PLA (nevystavovat vysokým teplotám viz. skleník apod.) nebo PETG (doporučuji odstranit…
Toothbrush Stand： Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount： toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…
I broke the glass and i replaced with a 3d printed one. The hole is after the toothbrush but a little bit bigger because i use a rubber inside. After preferences you can put some walls if you want to be more of your taste. Happy printing
Holder for Philips Sonicare toothpick with Tisken toothbrush holder.
the practical toothbrush holder thanks to the flexible handle can be adapted to several types of toothbrushes and thanks to the airy bottom the toothbrush easily dries from any moisture
Designed for minimum supports needed. Good to have bottom half printed with full infill to have a center of gravity lower.
Remix from the original model to fit the SoniCare Charger
The new toothbrush for Philips Sonicare no longer has the coloured ring. That's why I've now designed a clip so that everyone can recognise their toothbrush. PLA works fine. Neues Modell für die Ersatzzahnbürsten bin Aldi
Just a simple holder to hold the tooth brush on the HSW. Unfortunately, I don't know what model it is. Need to modify it? Edit it on Onshape ! Should have fixed the hex size in the update
Nice toothbrush, but looks like the standard button only lasts a year or two before the rubber cover starts falling apart. This is a simple replacement in TPU. I used 0.15mm layers. It locks into the original groove, but if you want to…
