Philips Sonicare Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for Philips Sonicare toothbrush and 2 brush heads
- Ocena
- 4,571 / 5
- Polubienia
- 186
- Pobrania
- 1064
- Wydruki
- 15
- Wyświetlenia
- 5847
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes.
It's a case for Philips Sonicare electric toothbrush and up to 2 brush heads. It was designed around HX680C model I have that measures about 19 cm from top to bottom without a brush head. Other models might fit as well, but that's not guaranteed. Based on experience of other users, HX6530 and HX6710 won't fit.
Top and bottom caps are secured to the main tube using snap fit joints. That part should be printed in 2 pieces (in PETG, if possible) and glued or screwed (using M2x6 countersunk screws) to the caps.
Brush head holder uses a spring clip that prints in place - no assembly needed there!
All parts are oriented in optimal printing orientation and are printable without supports. Use a good brim for main tube part though.