Counting matching models…
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Upon seeing the OralB charger holder with Schuko plug, I wanted to make one for my Sonicare toothbrush. I took inspiration from the OralB charger holders and took some “design advice” from the schuko adapter linked as remixes. V1 was the…
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
A minimalistic hat for your sonicare toothbrush so it doesn't scratch or poke your washbag. Printed with a 0.4 nozzle.
This is a mount that holds the Sonicare charger and power adapter, and plugs directly into the electrical outlet. This model works with the Sonicare HX6110 charger and is designed for an Apple 5 Watt USB power adapter (A1385). I have…
I have created this simple model for four toothbrushes - Braun kids Oral-B, Soocas, and Philips Sonicare. Printed with PLA as 2 items - base and top, glue it together.
Dual Toothbrush stand / holder for Phillips Sonicare + Curaprox interdental brushes (from the set - one square, one round) Also has a slot for Elmex gel (or small toothpaste 10-25ml) OR you can download a model without the slot.…
This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .
UPDATE : @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes. It's a case for Philips Sonicare electric…
Toothbrush Stand： Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount： toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…
Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…
Simple, slim and practical toothbrush holder for Philips Sonicare brush heads. Available with 2,4 or 6 slots to keep your bathroom tidy.
Print, add a piece of waterproof double sided tape, enjoy!
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
A holder for two Sonicare Toothbrushes.
Philips Sonicare toothbrushes (and the cheap third-party look-alikes) come with only a limited set of four colors for their marker rings. So if you're a family of >4 members, you have to invent other means to discern each family members…
A simple travel case for the Philips Sonicare 2100 electric toothbrush. Uses eight 10x3mm magnets.
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Simply slide over the top of the charger. Knobs for the toothbrush heads might have to be glued or the stems…
This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…
This is the missing travel box for the Philips Sonicare toothbrush head. No more filthy toothbrush heads in your travel bag... I like the slanted design... Let me know when you made one! Print it upright, with no support. It's advisable…
General I was looking for a nice and c ompact charging station for my Philips Sonicare toothbrush , when the station from 0x4C4A caught my eye. I really (!) like the idea, that the cable is completely hidden from sight and the carger can…
Wall Mount for the Sonicare DiamondClean 9000 charging station. It's Designed for the Plastic ring, but it also works with the Glass. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle. Using Extrudr Greentec Pro Black PLA.…
Remix of Mat3D's model to make it fit 2 toothbrushes, 1 side for Oral B toothbrush and 1 side for Philips Sonicare. In the middle there is place for 3 pieces of toothbrush holders. Printed it PLA or PETG with 20% infill. I did ironing on…
Stojan na: Nabíječku Philips Sonicare - možno s kartáčkem i bez něj Čtyři hlavice ve visící poloze Zubní pastu o průměru víčka do 34mm. Doporučuji tisknout s límcem, minimálně 10% vynucením podpěr, na 2 a více perimetrů, o nejméně 15%-ní…
Fusion 360 file included so you can change the letters. Or just print "sonicare - no letters.stl" that is without letters.
I printed the Philips Sonicare Toothbrush Travel Case by Ohuf but the cap was too loose and it wouldn't stay in place. After printing a few variations of the cap that just wouldn't fit right, I decided to create a model in OpenSCAD. I…
Two part holder for dual Phillips Sonicare electric toothbrushes. The two part setup makes it easy to clean and the drainage holes allow any water to drip from the toothbrush into the tray. The one in the pictures was printed in draft…
Vasilii's Sonicare case is very well design but unfortunately it did not fit my smaller Sonicare 4100. This sleeve fits in the original Sonicare opening and securely holds the smaller 4100 series. I did end up breaking off the center pin…
A simple holder for Philips Sonicare toothbrushes. I included holders for two different models. Philips Sonicare Prestige (HX9992) and Philips Sonicare DiamondClean (HX9911). Other Philips toothbrushes might or might not fit. There are…
Designed in Onshape: https://cad.onshape.com/documents/7c0608bed246b091e5e6fe6d/w/5e95cee882fe90aa5edd86d0/e/2c381474cf9ae06fd74efe2c…
Replace Sonicare button for the silicone rubber button. Print with your favourite flex filament (medium/soft) in an small layer hight (i used 0,09mm).
I made this to clear up some counter space on the bathroom counter. The original design intent was to just move the chargers for the 2 PhillipsSonicare toothbrushes to the side of the outlet cover. I kept revising it to accommodate more…
EN : Holder for Philips toothbrush with elimination of the stability problem of the brush head support. Material : PLA Layers : 0.1 - 0.2 (0.1 looks better) Supports : no See also:…
Most available models incorporate the charger, which is not what I wanted as the brush has very good battery life. I have only tested this with 5300, but believe it would work with 5000 / 6000 / 7000 series brushes. Designed to be…
Einstellung Empfehlung Material PLA/PETG/ABS (Antirutschunterlage in TPU ) Schichthöhe 0,2-0,3mm Infill 30–50% Stützstrukturen Erforderlich Düsendurchmesser 0,4-0,6mm Druckzeit ca. 3–6 Stunden Hilfreich Keine Supports in den Löchern für…
Double stand for the charging stations of the Philips Sonicare toothbrush.
I haven't found a wall mount for my Philips Sonicare 9900 Prestige toothbrush. So I decided to give it a try and design one myself. I'm quite happy about the result. I took inspiration from Toothbrush + Induction Charger Wall Mount…
This is a universal wall-mounted electric toothbrush holder designed to fit round and oval electric toothbrush handles . Compatible with most models from: Philips Sonicare Oral-B Braun Other electric toothbrushes with similar cylindrical…
Stojan na: Nabíječku Philips Sonicare - možno s kartáčkem i bez něj Čtyři hlavice - v jedné verzi hlavice stojí, v druhé visí hlavou dolů (hlavou dolů trochu lépe schnou) Zubní pastu o průměru víčka do 34mm. Doporučuji tisknout bez…
Station for 1 Sonicare Handle, 1 Brush Head and 1 Toothpaste Tube (little Caps Like in Picture) Printed with 0,16mm Layer Height and Organic Supports
Nice toothbrush, but looks like the standard button only lasts a year or two before the rubber cover starts falling apart. This is a simple replacement in TPU. I used 0.15mm layers. It locks into the original groove, but if you want to…
These brush head holders keep your electric toothbrush heads exactly where they belong: together, organized, and finally not rolling around your bathroom shelf anymore. Available in versions for 1 to 6 brush heads , they let you choose…
Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
This minimalist 3D-printed case is designed specifically for the Philips Sonicare 3100 brush head. The two-part shell offers a smooth, form-fitting enclosure that shields the brush from dust and damage during storage or travel. Features:…
EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…
Set of wallholders for Sonicare brushes and charger. Holders are customized for genders and smaller gender marks for kids. It is easy recognize for kids. Holders can be attached (glued) together with holes and fragment of filament. For…
Philips sonicare charger HX6100 Skadis toothbrush hanger Printed with normal auto generated supports (don't try tree support trust me) 75% gyroid infill, 6 wall loops, printed using outer brim but im not sure its necessary fits every…
My wife and I both recently upgraded to a Philips Sonicare 4100 electric toothbrush. They're pretty good, but they don't fit in the previous holder we were using for our manual toothbrushes. I built this simple stand to give both of them…
Sonicare Stand for 1 or 2 Toothbrushes
I liked the Sonicare Tooth Brush Travel Case by Ryan very much: small, a good fit for the brush, threaded cap… Just one problem… When I travel, sometimes I have to pack before the brush is dry so I prefer my toothbrush holders to be…
Based on the classic Rugged Box by Whity , and heavily inspired by David's Travel Case for Sonicare 4500 . Designed for traveling with Philips Sonicare 5300 toothbrush. While there are some designs on the web already, unlike this design,…
3D model of Phillips Sonicare holder to mount your brush on the wall. You can glue "Holder" to the wall, and connect it with "Base" . This is done for simple disassembly of the charger, for example for a trip. 3D PRINTING SETTINGS Layer:…
2x Sonicare and 1x kid brush. I designed this model to allow switching from the kid brush to another Sonicare in the future. You can glue the slide onto the wall and then easily swap the holder for different items.
see images for details
printed on an ankermake m5 in precision with PLA+, 10% inlay, 4mm nozzle, 0,16mm layer
A practical and stylish stand for the Philips Sonicare 4100 electric toothbrush that you can customize to fit your bathroom setup and personal taste. The design keeps your toothbrush and spare brush heads neatly organized in one place.…
EN : If it's going to be done, let's do it right! Here's a version for three brush heads. See also V1 and V2 for one and two brush heads, respectively. The individual pillars are numbered to avoid confusion. Material : PLA Layers : 0.2mm…
The original model is visually and functionally amazing, but taking it off the wall to clean or replace it was a pain. I designed this version that is as easy to print and mount but also easily removed from the wall. Use water-resistant…
Keep your Philips Sonicare toothbrush clean and organized with this custom 3D-printed holder featuring a dedicated brush extension slot. Designed to prevent mold buildup at the bottom of the toothbrush and the brush extension, it ensures…
This model is slotted for the double-sided tape I had on hand. STEP model provided for remix Printed this holder in PLA+ on default settings. The fit is quite tight but it is intentional, no one likes slop, slight scaling may be require.…
Toothbrush stand with toothpaste tube holder. (fits Sonicare FlexCare HX6964 / 77 or similer) (Toothpaste Tube Squeezer by - ottenjr HERE > https://www.thingiverse.com/thing:1147252 < ) Category: Bathroom
Neues Modell: Verbesserte Version 6 !! Hier ist wieder ein farbiger MarkerRing für PHILIPS Sensonic Zahnbürsten. Dieses Mal für die günstigen EURODONT Bürstenköpfe von ALDI (Süd). Leider passen auf diese günstigen Köpfe nicht die original…
Remix from the original model to fit the SoniCare Charger
Die Wandhalterung ist für das Ladegerät der Sonicare von Philips geeignet und bietet Dazu noch Platz für eine Powerbank. Ich habe als Powerbank Vorlage an einer Fresh 'n Rebel 12000 mAh Powerbank orientiert. Auf Anfrage kann ich gerne…
Simple Sonicar Stand (version with glass cup) NO supports needed ************************************************* Einfacher Sonicar halter (Version mit Glasbecher) keine Supports notwendig
This wall-mounted shelf is designed specifically for the Philips Sonicare UV sanitizing and charging unit. It allows you to place the device conveniently on the wall, saving valuable counter space in your bathroom while keeping the unit…
This is a major remix, of a remix, of the original design from @Charleszard . The purpose of this remix is to fix the issue with the slouching that eventually occurs with the friction fit of the AC plug in the original design. Because of…
Bathroom Organizer for Sonicare Brushes and Waterpik picks.
A simple, compact stand for three Philips Sonicare toothbrushes. None of the other models fit these specific toothbrushes, came in a different form factor, or were designed for a larger number of brushes. PETG is recommended. I printed it…
[DE] Beschreibung Schluss mit wackelnden Ladestationen! Mit diesem stabilen Ständer kannst du zwei Philips Sonicare 3100 Ladestationen sicher nebeneinander fixieren. Das Design sorgt für einen festen Stand auf deinem Waschbecken oder…
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…
EN : If it's going to be done, let's do it right! Here's a version for three brush heads. See also V1 and V2 for one and two brush heads, respectively. The individual pillars are numbered to avoid confusion. Material : PLA Layers : 0.2mm…
The original model is visually and functionally amazing, but taking it off the wall to clean or replace it was a pain. I designed this version that is as easy to print and mount but also easily removed from the wall. Use water-resistant…
These brush head holders keep your electric toothbrush heads exactly where they belong: together, organized, and finally not rolling around your bathroom shelf anymore. Available in versions for 1 to 6 brush heads , they let you choose…
Electric toothbrush holder for one Phillips Sonicare and one happybrush toothbrush. You may need to use custom support ("on buildplate only") because the happybrush opening has a quite long bridge. Leave your comments if it works without…
Simple Sonicar Stand (version with glass cup) NO supports needed ************************************************* Einfacher Sonicar halter (Version mit Glasbecher) keine Supports notwendig
Compact travel case designed for Philips Sonicare 6000 and 7000 series toothbrushes , featuring vent holes for airflow and drying , a snap-fit lid , and a hinged design to keep the toothbrush securely contained while traveling. The case…
This model is slotted for the double-sided tape I had on hand. STEP model provided for remix Printed this holder in PLA+ on default settings. The fit is quite tight but it is intentional, no one likes slop, slight scaling may be require.…
Toothbrush holder for Philips Sonicare Designed for Philips Sonicare GU14 6XW but may fit other models.
This wall-mounted shelf is designed specifically for the Philips Sonicare UV sanitizing and charging unit. It allows you to place the device conveniently on the wall, saving valuable counter space in your bathroom while keeping the unit…
This is a universal wall-mounted electric toothbrush holder designed to fit round and oval electric toothbrush handles . Compatible with most models from: Philips Sonicare Oral-B Braun Other electric toothbrushes with similar cylindrical…
The top silicone button on my Sonicare broke near the middle, print in TPU and seal with silicone after clearing out the old buttons. You do not have to remove the internals, but it can make it easier. I reccomend using a variable layer…
Modded version of the original mount made by another user. It has a little more surface area so my double sides tape had a little but more surface, seems to stick to the wall nicely. I included a .f3d file for editing the size in fusion.
Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…
With many toothbrush holders, I find them to be not very versatile and made of a lot of unnecessary material. They are either for classic toothbrushes or electric toothbrushes. You can rarely combine them, and on top of that, you want it…
A design for a holder for two Philips Sonicare toothbrushes. Having twins, a girl and a boy, each has their own toothbrush. Due to their small bases, they kept tipping over. I decided to create a holder that would stabilize the brushes…
WHY/WHAT? Simple gunk barrier for the Sonicare non-oval chargers - works on the Kids version too. It is designed to reduce the water that gets on the charger causing gunk/mold to start to form. HOW? Any material should do. I used PLA to…
Die Wandhalterung ist für das Ladegerät der Sonicare von Philips geeignet und bietet Dazu noch Platz für eine Powerbank. Ich habe als Powerbank Vorlage an einer Fresh 'n Rebel 12000 mAh Powerbank orientiert. Auf Anfrage kann ich gerne…
A simple travel case for the Philips Sonicare 2100 and 3100 electric toothbrush. Uses eight 6x3mm magnets.
I remixed the original to enlarge the opening to hold the toothbrush. Made a little wider as the toothbrush is slightly rounded. Added a square cutout at the back. Added a slight curve to the front to increase the slight added depth.
A minimalistic hat for your sonicare toothbrush so it doesn't scratch or poke your washbag. Printed with a 0.4 nozzle.
Držáka na kartáčky 2x dětský HX63xx + 2x Sonicare ProtctiveClean HX68xx. Pro kompletaci nutný: 1x samožezný šroub průměr 2,5mm délka 12mm pro oporu 3x zápustný šroub M3x14 3x čtvercová maticeM3 Pod nabíječkou je špulka pro navinutí…
