Philips Sonicare Case Remix single cap with magnetic closure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to cap one end and replace the snap connectors with magnets.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 189
- Wydruki
- 3
- Wyświetlenia
- 1533
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Top and case printed at the same time, single color PLA Basic, no supports, Textured PEI plate. Received a warning from Bambu slicer that indicated an unsupported cantalever which is the clip in the top. Printed without supports and after the print squeezed the clip together slightly and it freed it up to allow the toothbrush head to snap in place.
To get the magents installed with the right polarity, insert two magnets into the case body. This is easiest done by putting the magent onto a flat surface and pushing the case down onto the magnet, once press fitted, put the other two magents on top of those and force the case parts together, this will seat the magnets in the right direction.