1 / 5
Battery tray for Injora LCG carbon chassis — zdjęcie 1
1 / 5

Battery tray for Injora LCG carbon chassis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A battery tray for Injora LCG carbon chassis to move the battery to the front as much as possible.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
145
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

This battery tray moves the battery as much to the front as possible (at least for my car setup ;) ). It utilizes the existing holes in the chassis, so it is not needed to drill into the rails. It leaves enough room between the tray and servo/axle to get the shocks fully compressed (which usually doesn't happen) and allows to completely shrink the axle.
Inner size is around 80x40 mm, this fits well for my short 3S lipos.

Else

CAD files for FreeCAD are incuded, so you may modify the parts easily to your needs.

Tagi