156 modeli
I needed extended body mounts for a monster slash build and didnt want to buy them. Printed in PETG, we will see how well they hold up but its cheap to print spares uses m2.6 x 12mm wood screws to attach the posts
Arkham Horror LCG Player Board. Fits sleeved player cards. Track your health, sanity and actions remaining during investigator phase. Comes with small tray to store collected clues and resources. Designed in tinkercad and printed on…
This design is inspired by the Fox Belly created by the Artful Dodgers. It shifts the location of the Element StealthX transmission to be as low as possible and replaces the stock skid plate with a flat plate to help with breaking over…
I created a cardholder in the style of the original model that fits in the middle section for additional card storage. I did this so that I could replace the middle token/dial storage with more card storage in the Lord of the Rings Saga /…
This is bumper u made for a fimonda carbon frame (it can be used on other brands). It is 72mm wide. I would recommend printing it in PETG or something stronger then PLA. Category: Vehicles
These deck boxes can hold the decks of your favorite investigators, so you can store them between games and transport them safely. As an added bonus, once opened, they transform into handy card holders for your draw and discard piles. To…
This box has been designed to hold a set of my custom The Lord of The Rings LCG tokens: https://www.printables.com/model/243263-lord-of-the-rings-lcg-token-set The writings on the side are those on the One Ring. You need eight 8x2 round…
Tokens and staging area for the Lord of the Rings Living Card Game. It includes: Upgrade tokens: Willpower, Attack, Defense, Hit Point and Threat. Countable tokens: Resource, Progress, Damage. Exhaust tokens, which I printed in different…
I'm about to redesign some motor mounts for standard gearboxes including some common motors. I started with the INJORA Purple Viper mount which is unfortunately NOT available as a spare part at the moment If interested always try first…
These simple and compact holders may support Scenario reference, Act and Agenda cards, with a tray for doom and clue tokens. They can also be used with any board game featuring american-sized cards. Print two large holders and one small…
Baseplate dedicated to Arkham Horror LCG characters. Gap for card designed to fit card with sleeve with very lite friction not damaging card and neither sleeve. I made it since the ones already found in thingiverse have been with too big…
Soluciçon de almacenaje para las cartas de encuentro de El señor de los anillos LCG la comunidad del anillo. Cajas de cartas independientes para cada escenario más dos adicionales para las cartas de campañas y los encuentros comunes. Las…
This is bumper u made for a fimonda carbon frame (it can be used on other brands). It is 72mm wide. I would recommend printing it in PETG or something stronger then PLA. Category: Vehicles
Insert for Arkham Horror LCG - Return to box
requires your own drilling easy to print hope you like it Thanks, and have fun!
These deck boxes can hold the decks of your favorite investigators, so you can store them between games and transport them safely. As an added bonus, once opened, they transform into handy card holders for your draw and discard piles. To…
These card boxes have been modelled after the "Return To" expansion boxes published for the Arkham Horror Living Card Game. Fantasy Flight stopped publishing these boxes a few campaigns back, so you can use these to complete your…
requires drilling but that it. uses standard scx24 hardware Have fun building this DIY frame kit for the Scx24!
This box has been designed to hold a set of my custom The Lord of The Rings LCG tokens: https://www.printables.com/model/243263-lord-of-the-rings-lcg-token-set The writings on the side are those on the One Ring. You need eight 8x2 round…
All dividers where printed in .25 nozel on Prusa MK3S+ with color change for the icon. I put a brim as well to help from warping. No supports needed If you would like to buy me a coffee. You can through here: paypal.me/JakePens71 - Thanks!
Like the title says this plate moves the ESC / receiver box forward to make room for the installation of the 540XL motor.
With these you can store your cards unsleeved without them shuffling around inside their trays. If you use the Combo-Insert you can even store the investigator mini cards on the side of the tray. The adapters are designed to press-fit…
I decided to remix the Arkham Horror LCG Revised Coreset Storage Solution by @Joe_122351 to fit Arcane Tinmen Sleeves.
With this marker it will be much easier to see which locations are connected.
i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…
Hopefully this 3D model of the INJORA LCG Transmission can help in your RC crawler projects! Print it out and test fit in your rig, prior to pulling the plug on the real thing! OR use the STEP file to assist in your CAD designs!
Token holders - capsules - for the resources from the Arkham Horror LCG Revised Edition. Printer Settings: Material : PLA Resolution : 0.1 mm
This token tray is designed to work with BuyTheSameTokens' offerings for Marvel Champions LCG. The tray contains 15 compartments and each compartment holds 17 tokens. The compartments are made so tokens cannot get stuck and are always…
Insert for Marvel Champions LCG Expansions. This insert and dividers fit in the MCLCG expansion boxes. This design fits sleeved cards. No supports needed. I typically print these with 10% or 15% infill. Mix and match colors to match…
Divider that fits in the base game of Marvel Champions LCG. Print 12x of these to fill the insert in the base game. These do not fit in our expansion insert. No supports. I typically print with default top and bottom layers in Prusa…
Insert pro Arkham Horror - Karetní hru včetně rozšířeni Odkaz Dunwiche rozšíření kampaně a Odkaz Dunwiche rozšíření pro vyšetřovatele.
This little player's kit fits neatly into the “Return to…” boxes and holds everything you need for an enjoyable game in one place. Print one for each class, print only one or two for your favourite decks, print one and all the lids to…
My print settings: 0.4mm nozzle 0.24mm layer height
This one is designed for the bronco/defender style chassis. I will update later with the option to use it on a high trail later on. Assembly for the base frame is coded with colors: Yellow = M2.5 x 15mm, total 4 pieces Green = M2 x 8mm,…
Those dividers are for Arkham Horror LCG. I add them in english and in french as I create them. I will make them for all the base game and expansions. Ces séparateurs sont pour Horreur à Arkham LCG. Je vais les ajouter en anglais et en…
These are token holders for the Horror and Damage tokens found in the board game Arkham Horror - The Card Game . I took the inspiration from @RedWizard24 's Resource Token Holders . After printing them I wanted to have the same feel with…
What the title says. This makes it easy to keep neat stacks in an orderly fashion in the original game box. Customizable in its entirety. Variable names are self describing and source code is commented. Defaults are for sleeved cards with…
HPI Venture LCG Battery Tray using all stock hardware , print on the flat face PLA test print at 0.2 and 0.3 with %20 infill and support (silver in the photos) weight 26g ABS test print at 0.3 %10 infill and support (white in the photos)…
This model is remixed from GrandFather 's Arkham Horror LCG Agenda, Scenario reference and Act Holders . In order to declutter the room cards in my Arkham Horror LCG sessions, I use some tokens ( tjwill95 's Numbered Skeleton and Zombie…
Tokens and staging area for the Lord of the Rings Living Card Game. It includes: Upgrade tokens: Willpower, Attack, Defense, Hit Point and Threat. Countable tokens: Resource, Progress, Damage. Exhaust tokens, which I printed in different…
For my set of Arkham Horror I scaled them in the slicer to X: 102% Y:102% Z: 84%, this is the same scaling that I needed to fit the Horror & Damage tokens. You need 40 of each for a single copy of the base game.
Token holders/capsules for the clue/doom tokens for Arkham Horror the Card Game. I had found holders for all the other tokens already but the one that was missing was the round style for the clue/doom tokens… so after searching…
For my set of Arkham Horror I scaled them in the slicer to X: 102% Y:102% Z: 84%, this is the same scaling that I needed to fit the Horror & Damage tokens.
These are some custom boxes I have made to help store Arkham Horror LCG and for us to then only pull out what is needed and easily find the campaign we want to play.
Been searching for solutions to pimp up my chaos bag for a while, and i'm not a fan of the coin capsules everyone else is using, so after stumbling upon something similiar over etsy i thought about modeling my own version. This is a token…
Quick and easy job to replace the awful mini cards for the Tough / Confused / Stunned statuses on Marvel Champions LCG. Print these @0.20 layer height in your favourite colours and make sure you trigger a filament swap at layer 1.80 to…
These are a set of tokens that I have decided to make to know the actions that I have carried out during my turn in the board game The Lord of the Rings LCG
This is a Chassis made for the C24 and other similar models. It has a wide range of shock mounts for many sizes and angles of shocks to dial in a perfect ride height. I added some arches so the axles can go up higher in the chassis for…
One version for cards with sleeves, and a version for vanilla cards.
I needed a place to store the Tarot cards from the RT the Circle Undone set, so I designed this insert that fits into the Return to the NotZ box. There's a version with two compartments for game tokens and a version with five slots for…
I needed a place to store the custom content supply minicards (45 x 32 mm) for The Forgotten Age, so I designed this insert that fits into the Return To TFA box. Pretty niche, I guess, but here it is in case you want it. Print Settings…
Description A skidplate I'd created to fit a small Aliexpress gearbox and a Hobbywing fusion into the Injora LCG carbon chassis. You need to drill the holes for your gearbox by yourself. I angled the gearbox in two directions to move it…
Description Bumper for Injora LCG carbon chassis, just enough to protect the rails. No much overhead to not reduce your slope angle. I wanted to use the distance (mounting) tubes (78mm) in the front and the back, so I made the first hole…
Description This battery tray moves the battery as much to the front as possible (at least for my car setup ;) ). It utilizes the existing holes in the chassis, so it is not needed to drill into the rails. It leaves enough room between…
Hi, I designed an insert for Arkham Horror LCG with efficency and ease of use in mind. 😊 It fits around 400 sleeved cards without a problem (sleeve size is 63x88mm, 100μm) and all necessary tokens to play. By using this insert, I was able…
Der Lipo-Halter ist 3mm Flacher als original. Der Lipo liegt direkt auf dem Chassis auf und wird mit der oberen Brücke gehalten. Es wird nur ein kleiner 1mm Splint (oder Draht) benötigt um die Brücke unten zu halten. Der ESC passt perfekt…
A compact storage box designed for A Game of Thrones: The Living Card Game (AGOT LCG)
Super basic thing here - I just assembled ExPigeon's LCG chassis so I could refer to it working on one of my custom TRX4m bodies.
I'm about to redesign some motor mounts for standard gearboxes including some common motors. I started with the INJORA Purple Viper mount which is unfortunately NOT available as a spare part at the moment If interested always try first…
Battery strap holder Battery mount designed for the Traxxas Slash 4x4 1:10 LCG chassis (part no. 7422). The internal battery compartment measures 156 × 47 mm. I wasn’t satisfied with the stock battery mount because I use several packs of…
v2 of my lcg chassis. will probably need some customization to fit your needs Changed hole size in skid plate so screws no longer strip out. tweaked some parts for driveshaft clearance and servo clearance. Now includes bracket pieces for…
you can print it as it is right now but it might not fit your gun , atleast not intentionally, i made this so you can take it and modify it yourself to fit your project included are one that is most like the uclg, one grip with no…
you can print it as it is right now but it might not fit your gun , atleast not intentionally, i made this so you can take it and modify it yourself to fit your project included are one that is most like the uclg, one grip with no…
Traxxas Slash LCG ESC / Receiver Tray Flat mounting tray for the Traxxas Slash 4x4 LCG Chassis Hardware: 4x M3x6 FHCS Direct fit for Traxxas Slash LCG chassis (uses existing mounting holes) Designed for both stock and aftermarket ESCs…
Support carte personnage la fente pour soutenir la carte est suffisamment grande pour accueillir une carte avec une sleeve. Il y a 4 petits rangements de tokens qui sont courbés pour une manipulation facile des tokens.
The idea behind this model is to protect the electronics from dust and debris while keeping the car easy to operate: no need to remove the dust cover when changing the battery no need to remove the dust cover to start or stop the ESC…
For taller batteries in the slash 4x4 vxl non-lcg.
6/24/2020 Added V5 files for all the class decks and sliding lids.Print one box and one lid for each class deck. Box options for hex or solid sides. This is a customizable deck holder. It can be configured to allow vertical insert of the…
These are some simple card stands for Arkham Horror:TCG and Marvel Champions LCG that have additional slots for tokens from Buy the Same Token, which is my token manufacturer of choice. This is perfect for doom tokens or threat tokens.…
Cthulhu artwork: https://www.klipartz.com/en/sticker-png-fymip Made for resource and clue tokens from: https://www.thingiverse.com/thing:2799672 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
This is a very minimalistic insert for the "Return To"-boxes of the Arkham Horror LCG with flippable dividers. I decided to use thin walls and holes for the dividers insead of making thick walls with slits. The dividers are flexible…
These are some simple token cases for Arkham Horror:TCG and Marvel Champions LCG that have slots sized for tokens from Buy the Same Token, which is my token manufacturer of choice. I use the 4-slot cases for investigators and the 5 slot…
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
Having trouble loosing your investigator card amongst the hords of enemies and clues? Or are you just struggling to move them about the board? With each card holder featuring the investigtor class icons on one side and Arkam Horror…
I wanted to have a stylish way to remember Lola Haye's current class and designed this small gadget. The indicator has small pegs on its back to snap into place. You can adjust the force needed for turning by sanding the pegs carefully…
0.5mm Layer width 0.2mm Layer height Fuzzy skin (optional) 0.15mm Thickness 0.3 Point Distance No supports The sleeved version fits nicely with my Sleeve Kings. The un-sleeved version may need some tweaking for a snug fit.
These tokens were primarily designed to mark the exhaustion of cards and to mark actions. The diameter of these tokens is the same as the smallest tokens in the revised edition. Note that the inner symbol is 0.3 mm higher than the top…
Description The new format for Arkham Horror LCG campaign boxes prompted me to share these files since previously they were only useful for the Marvel Champions core set. This insert deals with a couple of the issues I had related to the…
A remix of a remix... Dan Brown's Sleeved Card Agenda and Act Deck Holder , but remixed to incorporate the modified doom token holders from Ruzzler's all-in-one remix Arkham Horror LCG Dashboard/Hub . I love the original and beautifully…
I love playing with the stands by LostPrinter but wanted some without the class icons. This stand features the game logo on both sides. Printing instructions from the original models obviously still apply.
This is an Investigator Board I whipped up for Arkham Horror - The Card Game. It is 100% tailored to my setup, so it might not be perfect for you. It perfectly fits for Burger Tokens that I use, and it also is sized to fit on top of the…
It's just a simple two-sided Arkham Horror LCG path markers.
This is an extended battery mounting bracket, for the Traxxas Slash 4x4 LCG chassis. I designed it to work with my Turnigy Rapid 5500 mah 4S LiPo battery (as you can see in the pictures) Be aware that for this to fit the aforementioned…
I use the empty Mansions of Madsness box (285x285mm) To save PLA and lighten this storage, I only use 1 line for the walls (270g for the biggest part). These designs all assume no sleeves or perfect size sleeves on these cards. Print…
I keep each scenario cards in one of the 20mm trays and campaign encounter cards together in 60mm tray, and last 60mm tray if for core set cards required (or 2 player decks)
This token box/tray is meant for the Arkham Horror Living Card Game tokens that are used during the game. I didn't include any room for the Chaos tokens that aren't in the Chaos Bag. I've included a blank lid in case you don't like the…
An all in one Dashboard/hub for Arkham Horror LCG. This allows you to hold the Agenda Deck, Act Deck, Doom Counter, All tokens, and encounter deck. You will need a large print bed (300x300) to print this beast. I did not create any of the…
This insert is designed to fit the revised version of the Lord of the Rings LCG core set. This also fits the “Saga” expansion boxes as well for the LOTR LCG, since the boxes are the same exact size. I included the files required to print…
This is a remix of TheForrestFire's card trays that they made for the Lord of the Rings LCG. I own the core set for Marvel Champions, but don't have enough cards to even fill one side of the box using those trays, so I wanted a version…
Hold your Arkham Horror LCG Agenda and Act cards with style! Supports are needed for the back of the object. I recommend using new organic supports in PrusaSlicer 2.6
Model consist of 3 rings (one with handle and 2 with hole), each ring holds 5x5 poker tokens with diameter of 40mm and height 3.5mm this can keep full collection of tokens including bless, curse, frost and all original symbol and number…
Holder for Arkham Horror "Chaos Tokens". Prevents the cardboard tokens from sticking together in the bag while being a bit smaller than the coin collectors that many folks use. I added some knurling round the outside because I fiuigured…
As the the mounting points of the rear sway bar are not good enough (IMHO) I designed a holder which seem to function perfect and is easy to install and print. I used M3x16 screws to mount the holder and the shock tower to the body. For…
I like the size of the new box a lot, but on its own, it's still not much of a storage solution. That's why I came up with an insert that fits into the box and has 18 slots for as many dividers as you need. It fits sleved cards easily and…
This is a set of modular inserts for people who want to store the cards in the original box. It fits sleeved cards and has enough room for the tokens aswell. Enjoy! Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't…
Has separate pieces for the base, border and tentacles. Base has the Necronomicon symbol embedded, good for switching materials. The dimensions are made for a tight fit for sleeved cards. Not my model, but very cool one. Tried print it…
You can use these trays for the Gamegenic card box. I designed the trays for the Lotr LCG and printed the trays in the colours of the different spheres. The Gamegenic dividers fit into the trays and my card boxes for the Lotr LCG…
A deck box for the Lotr LCG Starter Decks "Elves of Lórien", "Riders of Rohan", "Defender of Gondor" and "Durin Dwarves"
