Arkham Horror LCG insert (sleeved cards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for older version of Arkham Horror LCG for 2 players. Each box is separate and you can take it out when needed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I designed an insert for Arkham Horror LCG with efficency and ease of use in mind. 😊
It fits around 400 sleeved cards without a problem (sleeve size is 63x88mm, 100μm) and all necessary tokens to play. By using this insert, I was able to fit base game, the Path to Carcosa expansion and additional investigator starter deck (exactly 450 cards and it almost spills out). It may look loose in the orignal cardboard box, but all the inserts were designed having enough clearance to take them out without too much friction or flexing.
Print it in any filament you like, I printed it in PLA with 0.16mm layer height on Creality K1C.
Also, I designed neat spacer with Arkham Horror logo to separate type of cards for easier sorting when you take out whole bunch of cards from the box. You can print it in two colors for better looks. (filament change at 0.6mm of height)
Feel free to remix. DM me for OnShape project if you need a solid base.
All suggestions, comments and makes are welcome!
IMPORTANT!
This insert is designed for older release of the game (for two players)
https://boardgamegeek.com/boardgame/205637/arkham-horror-the-card-game