1 / 4
Traxxas Slash LCG 4WD dust cover — zdjęcie 1
1 / 4

Traxxas Slash LCG 4WD dust cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover to protect electronics inside the Traxxas Slash

Ocena
5 / 5
Polubienia
5
Pobrania
16
Wydruki
0
Wyświetlenia
145
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

The idea behind this model is to protect the electronics from dust and debris while keeping the car easy to operate:

  • no need to remove the dust cover when changing the battery

  • no need to remove the dust cover to start or stop the ESC

  • added active cooling

There are two versions of the dust cover, differing in the position of the button used to control the ESC. This depends on the ESC version. The old ESC 3355X has visible capacitors behind the wires, and the button needs to be positioned slightly forward. The new ESC 3355R has no visible capacitors, and the button needs to be positioned slightly backward.

The front air intake (cooling grille) also has two versions. You can use a piece of fabric (I used an old vacuum cleaner filter), or print a solid filter, which is simpler but does not remove dust from the incoming air.

The fan used at the back is the original Velineon ESC fan, installed to blow air out of the cover.

The hinge for the switch lever is made from 1.75 mm PETG filament.

All bolts are M3:

  • to fasten the cooling grilles: 9 pcs of M3 × 6

  • for the connector cover: 1 pc of M3 × 6

  • to fasten the front of the cover to the chassis: 1 pc of M3 × 10

  • to fasten the side of the cover: 2 pcs of M3 × 20

  • the fan is mounted with 4 pcs of M3 × 10 + 4 locknuts

The inspiration for the switch button and the hinge comes from this design: https://www.thingiverse.com/thing:446887

Tagi