Traxxas Slash LCG 4WD dust cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover to protect electronics inside the Traxxas Slash
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 145
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
The idea behind this model is to protect the electronics from dust and debris while keeping the car easy to operate:
no need to remove the dust cover when changing the battery
no need to remove the dust cover to start or stop the ESC
added active cooling
There are two versions of the dust cover, differing in the position of the button used to control the ESC. This depends on the ESC version. The old ESC 3355X has visible capacitors behind the wires, and the button needs to be positioned slightly forward. The new ESC 3355R has no visible capacitors, and the button needs to be positioned slightly backward.
The front air intake (cooling grille) also has two versions. You can use a piece of fabric (I used an old vacuum cleaner filter), or print a solid filter, which is simpler but does not remove dust from the incoming air.
The fan used at the back is the original Velineon ESC fan, installed to blow air out of the cover.
The hinge for the switch lever is made from 1.75 mm PETG filament.
All bolts are M3:
to fasten the cooling grilles: 9 pcs of M3 × 6
for the connector cover: 1 pc of M3 × 6
to fasten the front of the cover to the chassis: 1 pc of M3 × 10
to fasten the side of the cover: 2 pcs of M3 × 20
the fan is mounted with 4 pcs of M3 × 10 + 4 locknuts
The inspiration for the switch button and the hinge comes from this design: https://www.thingiverse.com/thing:446887