Under-Bed Power Supply & Cable Cover (LED Strip Driver Cable Box).Cobertura para Fonte de Alimentação e Cabos sob a Cama (Caixa para Driver de LED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean cover to hide a PSU and cables under the bed. Simple screw-on tabs, prints fast, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A minimalist under-bed cover to hide a small power supply/LED driver and its cables for bed-bottom lighting. The box includes two mounting tabs so you can fasten it to the bed frame or skirting and keep everything out of sight.
One side is intentionally open to promote airflow/heat dissipation and to simplify maintenance—you can slide the PSU out from the side without removing the whole box.
Why it’s handy
Hides PSU and cable mess neatly under the bed;
Keeps cables off the floor and away from feet/robot vacuums:
Open-side design improves ventilation and serviceability;
Prints fast without supports in standard PLA/PLA+
Note:
Licensed under Creative Commons — Attribution (CC BY 4.0). Personal and commercial use allowed with attribution: “Model by AdoredThings — Under-Bed Power Supply & Cable Cover.”
If you’d like to support my work, tips are welcome: https://wise.com/pay/me/anapaulaa216
Dimensions (outer size of the STL)
Width 140 mm × Height 120 mm × Depth 40 mm
(Includes extra mounting tabs designed for ~30 mm fasteners: screws or nails)
Recommended printing (tested on Elegoo Neptune 4 Pro - economy settings)
Material: PLA/PLA+ (PETG also OK)
Layer height: 0.20–0.28 mm
Walls: 3 perimeters (~1.2 mm)
Top/Bottom: 4–5 layers
Infill: 15% (Grid or Gyroid)
Note: For a stronger part, use 4–5 perimeters (1.6–2.0 mm walls), 6–8 top/bottom layers, 25–35% infill.
Orientation: flat back on the bed; tabs up
Supports: none
Hardware
2× screws or nails ~30 mm length, Ø 3–4 mm works well
Mounting
Route the PSU cables and place the box to check clearance.
Use the tabs as a template to mark holes.
Pilot-drill if fixing to wood and fasten with ~30 mm screws (or nails).
Tuck excess wiring inside and connect your LED strip.
Notes
Designed in Tinkercad; exported as STL.
For warmer PSUs, consider PETG and ensure some airflow around the unit.
Suitable for desks/TV stands as a general cable/PSU cover as well.
Printer & slicer
Printer: Elegoo Neptune 4 Pro
Slicer: OrcaSlicer/PrusaSlicer profiles used
If you’d like to support my work, tips are welcome: https://wise.com/pay/me/anapaulaa216