1 / 1
Hex key holder for 1.5 to 10 mm keys
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metric hex / allen key holder for sizes 1.5 to 10 mm.
- Ocena
- 4,333 / 5
- Polubienia
- 33
- Pobrania
- 566
- Wydruki
- 9
- Wyświetlenia
- 1906
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 9) (Komentarze: 10)Remiksy (0)Kolekcje (66)Powiązane
Updates
- 2022/03: Added chamfer to one side for easier insertion of keys (v1.1), made clamping surface area inside the holes slightly larger.
Description
Metric hex key holder for sizes 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 mm.
Print Settings
- Layer height 0.2 mm
- Line width 0.42 mm
Recommended material is TPU. Might work in PETG. Due to creeping, it will not work in PLA for more than a couple of days - after that, some keys will just slip out.
Depending on your step and flow calibration, you might need to scale this print up or down slightly for a perfect fit. As a point of reference: Scaling the part +-0.9% in the X & Y direction changes the biggest hole diameter by +-0.1 mm.
Approximate print time @ 60 mm/s: 0:50 h