1 / 1
Hex key holder for 1.5 to 10 mm keys — image 1

Hex key holder for 1.5 to 10 mm keys

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Metric hex / allen key holder for sizes 1.5 to 10 mm.

Rating
4.333 / 5
Likes
33
Downloads
566
Makes
9
Views
1,906
Reviews
6

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Updates

  • 2022/03: Added chamfer to one side for easier insertion of keys (v1.1), made clamping surface area inside the holes slightly larger.

 

Description

Metric hex key holder for sizes 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 mm.

 

Print Settings

  • Layer height 0.2 mm
  • Line width 0.42 mm

Recommended material is TPU. Might work in PETG. Due to creeping, it will not work in PLA for more than a couple of days - after that, some keys will just slip out.

Depending on your step and flow calibration, you might need to scale this print up or down slightly for a perfect fit. As a point of reference: Scaling the part +-0.9% in the X & Y direction changes the biggest hole diameter by +-0.1 mm.

Approximate print time @ 60 mm/s: 0:50 h

Tags