1 / 2
Nozzle Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Nozzle Box with labels Please read the description of how to print this box
- Ocena
- 4,6 / 5
- Polubienia
- 33
- Pobrania
- 193
- Wydruki
- 7
- Wyświetlenia
- 1253
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (3)Kolekcje (30)Powiązane
Please read the description of how to print this box
Print instructions
The file nozzle-box-new.stl contains several parts.
- If you want the box to be smooth on the top (without labels) you can just open it in your slicer and print it.
- If you want the labels on the top to be engraved, you need to split the file into parts (in your slicer) and delete the parts 3 to 15.
- If you want the labels on the top to be printed in a different color, you need to split the file into parts (in your slicer) and generate two gcode files out of it. One with the parts 1, 2 and 16 and one with the parts 3 to 15. Print the file with the part 3 to 15 first (WITHOUT SKIRT!), change the filament and then print the other one.
The labels are low enough that there is no problem with mesh bed leveling.
I recommend printing with a 0.25 mm nozzle, so the labels on the inside of the box are printed properly.
The pre-sliced files are for printing with a 0.25 mm nozzle, with the labels on the top in a different color and with a color change for the labels on the inside of the box.