Reach Low Profile Wireless Split Keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imagine a Lily58 with not inner cental keys. and a detached Num row.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This was a fun and challenging project to get it designed. My original thought was to have it look like the old 90's era of see through electronics.
This board when built comes in from base of the case to the top of the keycap at only 18mm total. which means you have very little room for your matrix wires. Be sure to plan accordingly, i struggled a bit to get everything to sit as nicely I did.
I suggest at minimum using PLA+ as the battery area is only .5mm thick and the rest of the case bottom is .75mm thick.
Materials needed outside of printing
16 (8 per side) M2 x 6 bolts
16 (8 per side) M2x4 Heat-set Inserts
2 Nice!nano MCU (or clones like in my build)
I used 2 600mah Batteries. I have included the reference piece I used when designing to aid in case you have some batteries on hand.
Please build this, and share your work! 6d love to see what others decide on color/material selection!
Have fun, feel free to reach out with any questions!