Altimeter clock - MMU and Single extruder version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single Extruder and MMU versions for a DIY Altimeter clock
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a design for an Altimeter clock. There are 2 versions available, each with it's own STL if needed, however it's suggested to use the 3mf file and change the settings for your printer.
Single Extruder version - 23cm clock:
The faceplate and the back are to be printed as 2 separate pieces. For the faceplate, set the layer height to 0.2mm and from the Prepare tab, do a filament change at layer 18 (or 3 layers from the top). This'll help you achieve the white writing on top of the black.
MMU Version - 22.2cm clock:
Print face-down. Ensure that the bed is clean, level and monitor the first layer closely.
Clock Mechanism:
Purchase a clock mechanism with atleast 7mm worth of threaded section. Ensure it comes with hands as the model doesn't include clock hands.
For private use only.
Hope you enjoy!