Balcony Glazing Hook Rest / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your balcony glazing hook neat and horizontal — no more hanging hooks!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small and simple 3D-printed add-on that keeps the balcony glazing hook in a neat, horizontal position when not in use.
No more “hanging hook” – this little rest holds it nicely aligned and makes the glazing system look clean and organized.
Just slide it under the hook so it rests perfectly level.
This is designed to work with the sliding glazing system described at https://zasklivanilodzii.cz/posuvne-zasklivaci-systemy/ so the existing hook remains tidy and aligned.
Designed for standard balcony glazing hooks but can be easily adjusted if needed.
Features:
- Keeps the hook horizontal and tidy
- Prevents the hanging look
- Easy to print and install
- No screws or glue needed
Print settings:
- Material: PLA or PETG
- Perimeters: 3
- Layer height: 0.2 mm
- Infill: 15 %
- Supports: Not needed
Onshape model source:
https://cad.onshape.com/documents/3aed56b8ab88f18af48421bb/v/cf73ba12236f6afca6736b52/e/ae3cec76848140effb9c0da3