Water Bottle Mount for Bike Handle Bars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Be able to drink water while riding. Also adds an extra water bottle for long distance biking. Can hold 5 pounds.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Water bottle holder for handle bars. Adjustable angle. Allows you to drink without pulling over. Can also be used to hold speakers and is meant to be expanded on in the future with new uses. This is not a remix.
*Parts Needed*
- water bottle holder for bike - This print isn't the actual water bottle holder, it is the adapter that allows it to go in the handle bars!
- 4 bolts - the head of the bolt needs to be less than .4 in, the bolt needs to be around .8 in long, the body of the bolt needs to be less than .22 in in diameter.
- 4 nuts - less than .32 in in diameter
Print in PETG or ABS for strongest print. PLA will also work. For the first 2 filaments, use 30% infill. For PLA, use slightly higher.
*Warning*
if the infill % is too high, the handle bar mount clip might snap when putting it on the handle bars. You may have to print it in 2 parts. Lower infill for the handle bar mount clip and higher for the handle bar mount holder.
*Supports*
Generate supports! you need them in order to insure the ‘crowns’ print accurately. the crowns may not serve much purpose now but they will if add more functionality.
takes about 1h 50 - 2h to print