1 / 10
DF64 (Solo, G-lota) Cup holder for stainless steel cup. — zdjęcie 1
1 / 10

DF64 (Solo, G-lota) Cup holder for stainless steel cup.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall.…

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall. with a 1mm thick support ring near the top).

The stainless-steel cup, besides looking nicer than the clear plastic one, reduced static electricity effect.

This cup holder places the cup close to the chute at a 22° angle from the body.

No little nub on the back since I find that the longer mount which matches the curvature of the grinder body is effective at positively preventing rotation.

The holder matches the taper of the cup. The ring is a bit beyond a semicircle, resulting in a satisfying grip on the cup.

I printed using a Bambu P1s in basic PLA at 0.16 with 50% cubic infill. I used tree support on the bed only to support the convex arch of the mount. It may print fine without support, I didn't try. I used Support PLA at the interface for easy removal.

Category: Kitchen & Dining

Tagi