DF64 (Solo, G-lota) Cup holder for stainless steel cup.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall.…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Designed to hold a stainless-steel cup commonly available online (58mm tapering to about 45mm, and about 70mm tall. with a 1mm thick support ring near the top).
The stainless-steel cup, besides looking nicer than the clear plastic one, reduced static electricity effect.
This cup holder places the cup close to the chute at a 22° angle from the body.
No little nub on the back since I find that the longer mount which matches the curvature of the grinder body is effective at positively preventing rotation.
The holder matches the taper of the cup. The ring is a bit beyond a semicircle, resulting in a satisfying grip on the cup.
I printed using a Bambu P1s in basic PLA at 0.16 with 50% cubic infill. I used tree support on the bed only to support the convex arch of the mount. It may print fine without support, I didn't try. I used Support PLA at the interface for easy removal.
Category: Kitchen & Dining
