1 / 3
TOPCOM Twintalker 9000 Belt Clip v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robust belt clip designed to slide onto the existing rails of the TOPCOM Twintalker 9000
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Small, robust belt clip designed to slide onto the existing rails of the TOPCOM Twintalker 9000 and secure with a screw. Version 2 features a steeper lower bite angle for a more secure fit on belts and pocket edges. Print in PETG or ASA with a brim for reliable bed adhesion.
Key features
- Purpose: Secure, low-profile belt clip for TOPCOM Twintalker 9000.
- Compatibility: Slides onto device rails; retained with a screw.
- Version note: v2 increases the steepness of the clip’s lowest part for better grip on belts and pocket edges.
- Material: PETG or ASA recommended; PLA acceptable for quick prototypes.
- Print orientation: Print with the clip’s rail-contact face on the bed for best dimensional accuracy.
- Bed adhesion: Use brim to reduce lift and ensure stable printing.
Print settings and recommendations
- Material: PETG or ASA.
- Layer height: 0.12–0.2 mm.
- Infill: 30–50% (gyroid or grid).
- Perimeters / Walls: 3–4 perimeters for strength.
- Top/Bottom layers: 6–8.
- Nozzle temp: PETG 230–250°C; ASA 240–260°C.
- Bed temp: PETG 70–80°C; ASA 90–110°C.
- Print speed: 30–50 mm/s.
- Adhesion: Brim recommended; skirt optional.
- Supports: Not required if oriented as recommended.
Usage and safety
- Use: Slide onto rails, position, and secure with screw. Check clip retention before regular use.
- Durability: PETG and ASA resist flex and outdoor wear better than PLA.
Older version still available:
https://www.printables.com/model/1373064-topcom-twintalker-9100-belt-clip-replacement