1 / 3
TOPCOM Twintalker 9000 Belt Clip v2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Robust belt clip designed to slide onto the existing rails of the TOPCOM Twintalker 9000
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Small, robust belt clip designed to slide onto the existing rails of the TOPCOM Twintalker 9000 and secure with a screw. Version 2 features a steeper lower bite angle for a more secure fit on belts and pocket edges. Print in PETG or ASA with a brim for reliable bed adhesion.
Key features
- Purpose: Secure, low-profile belt clip for TOPCOM Twintalker 9000.
- Compatibility: Slides onto device rails; retained with a screw.
- Version note: v2 increases the steepness of the clip’s lowest part for better grip on belts and pocket edges.
- Material: PETG or ASA recommended; PLA acceptable for quick prototypes.
- Print orientation: Print with the clip’s rail-contact face on the bed for best dimensional accuracy.
- Bed adhesion: Use brim to reduce lift and ensure stable printing.
Print settings and recommendations
- Material: PETG or ASA.
- Layer height: 0.12–0.2 mm.
- Infill: 30–50% (gyroid or grid).
- Perimeters / Walls: 3–4 perimeters for strength.
- Top/Bottom layers: 6–8.
- Nozzle temp: PETG 230–250°C; ASA 240–260°C.
- Bed temp: PETG 70–80°C; ASA 90–110°C.
- Print speed: 30–50 mm/s.
- Adhesion: Brim recommended; skirt optional.
- Supports: Not required if oriented as recommended.
Usage and safety
- Use: Slide onto rails, position, and secure with screw. Check clip retention before regular use.
- Durability: PETG and ASA resist flex and outdoor wear better than PLA.
Older version still available:
https://www.printables.com/model/1373064-topcom-twintalker-9100-belt-clip-replacement