Bambu filament winder / spooler updates part2 (axles, donor legs, universal centering disk)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Further mods and additions for Bambu filament winder / spooler.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I got fed up with having a set of spool centering disks since I have lots of different sized spools for my filament making/recycling setup and designed a disk that should work with wide range of spools. Probably not all but at least it replaces the most common spools with 50-55mm center hole.
After printing the disk (PETG recommended, 0.2mm layers), bend the disk slightly to free the ‘wings’. They should break free quite easily since there's a 0.2mm gap.
Axles needed to be modified to make this work so you'll need to print those too.
Also added legs for the donor frame.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Bambu_filament_winder_spooler_remix