Bambu filament winder / spooler updates part2 (axles, donor legs, universal centering disk)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Further mods and additions for Bambu filament winder / spooler.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So I got fed up with having a set of spool centering disks since I have lots of different sized spools for my filament making/recycling setup and designed a disk that should work with wide range of spools. Probably not all but at least it replaces the most common spools with 50-55mm center hole.
After printing the disk (PETG recommended, 0.2mm layers), bend the disk slightly to free the ‘wings’. They should break free quite easily since there's a 0.2mm gap.
Axles needed to be modified to make this work so you'll need to print those too.
Also added legs for the donor frame.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Bambu_filament_winder_spooler_remix