1 / 3
ReefMat 500 Chuck
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Red Sea ReefMat 500 replacement chuck
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I found that I had inadvertently thrown away one of these ReefMat 500 chucks when I was changing the roll. To order a replacement was weeks of lead time. I couldn't afford to have my filtration off that long so I created my own replacement.
If you're printing from STL and not the 3MF file check these settings:
Since this piece may have some force imposed upon it I printed in PLA+, 5 walls, and 80% infill to ensure it's solid. Also as there's a recess inside the chuck, make sure supports turned on.