Liczymy pasujące modele…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
Based on a nice project by adafruit, I made a really overengineered bike light for my niece and nephew.
Upgrade your garage wall button with this mechanical switch conversion. Instead of a cheap plastic doorbell-style button, this uses standard Cherry MX-compatible switches to trigger your garage door opener. Mechanism : This is a wired…
Summary This print made for a great first 5 tool multi-color/material test on my XL. Tools 1,2,4, and 5 are PLA, while tool 3 is TPU for most of the tubing. Printing Tip I struggled to get this to print properly because the back strut…
This "come-along winch" from Menards has a two-to-one reduction pulley. The cable can jump the sheive and get jammed against the side wall. The spacers take up the excess space, keeping the cable on the sheive. I used PETG because it is…
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
Desk rail pen holder for Fredde desk. Needs 6mm hook and loop strap to hold in place. Smaller holes will fit Lamy Safari pens, large fit Lamy Al-star. Print low density with two perimeter layers, or whatever your machine likes best, most…
I have a Red Ryder BB gun, which has an awkward method of loading BBs. I wanted to design a clip-on BB loading funnel. Before starting that process, I did a search and found the original design. It looked like it would save me some design…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Update: Added ML_12mm.STL for two layers and ML_24mm.STL for a single layer. --- This is the first of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and three of the push buttons from my Arcade…
plus facile à démonter eTPU 95A Print in flex filament
Update: Added MLS_12mm.STL for two layers and MLS_24mm.STL for a single layer. --- This is the second of a three part series of multi-layered joysticks that use my arcade joystick mechanism (V3) and five of the push buttons from my Arcade…
I painted this model in Prusa slicer . Printed on the Prusa Mk4s with Mmu3. Lane 1 — Skin colour Lane 2 — Black Lane 3 — White Lane 4 — Pink Lane 5 — Brown All PLA PS. I used a 0.4 HF Nozzle
recogedor de cable. No necesita soportes. wire clip wall. Free suports.
Print per original model instructions. I recommend 3 walls with a 0.4mm nozzle for the frame.
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
Measuring spoons for visually impaired people, holes make it easier to recognize. Printed with PLA 100% infill. Not mine creation, just reupload it from thingiverse.
Realistic looking pei sheet with texture to use in your slicer software.
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
Object description: Remix of the original part “Wifi_module_cover_R1”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The…
Object description: Remix of the original part “el-box-cover_R4”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The NFC…
Modern Decorative Candy Holder: Textured Design for 3D Printing This candy holder has a stylish, textured design that combines elegance with functionality. Its wavy, semi-translucent appearance, especially when made with transparent…
A small d20 inspired dice tower. I saw "Dice Tower Shaped Dice tower" (https://www.printables.com/model/863751-dice-tower-shaped-dice-tower) and wanted something similar, but D20 shaped, that could be printed in one go on my Voron v0.2.…
It's a Credit card-sized, precise measuring tool. So I have created this tool and want to share it with you as I am sure you have been in this situation as well. You are outside, without your caliper and you just need to find out the…
es un formicarium (hormiguero), redondo con sistema de humedad centralizado
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
This model hold your device, takes less time than the original, and has a cool apple logo to show your apple pride. (Not original, only updated.)
A colored Pikachu token to play Pokemon or to offer. (Pikachu and Pokemon are trademarks from Nintendo)
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
UPDATE December 14, 2025: I added some thrust washers. These are there to keep the Swirly-Hub-Things™ from jamming against the legs. Ask me how I know we need this! UPDATE December 9, 2024: I modified the Onshape project to make the the…
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
Soporte diseñado específicamente para montar Home Assistant Green en posición vertical en la pared. Permite una instalación limpia, ordenada y segura, manteniendo el dispositivo correctamente fijado y con espacio suficiente para una buena…
Coffered ceiling hook I created the snap-on hook design at the request of my wife, who loves Christmas decorations and wanted to decorate the ceiling of the entrance hall. The hook can be easily snapped on and off from the strip of the…
Abominable Snow Monster | Bumble | Christmas Lights | Rudolph the Red Nosed Reindeer
I want to display my Game Boy Pocket on a shelf with other artifacts and have it be powered on permanently, so here's a stand that supports the 3.0v DC cable from funnyplaying.com! I like the minimal stand from injectx so this is modeled…
Features Gramophone-Inspired Design: A timeless aesthetic with elegant curves reminiscent of antique gramophones. Integrated Amplifier: Delivers rich, immersive sound quality. Functional Acoustic Horn: Enhances natural sound projection…
Should fit right in the bottom of a Kailh choc v1 switch. Reduces the travel distance and makes the switch bottom out sooner. I recommend experimenting a bit with the height and see what works for you. I've found that anything above 0.6mm…
hi I've built 4 reclaimers, this is my first improvement for it. the cap will require the other ancillary parts to make function. Print the cap with auto organic tree support. Print the longer piece with a brim. you'l also need two…
The original design had a stacking lip on the bin which is not needed, and I had finger holes to get the staples and staple puller out, but it is easier to just dump it out.
Tested and works with S-150-12 model. Print in PETG.
A keycap puller for doing keycap puller things >:) if you want a tighter puller you could scale it down just a bit and it might work a bit better 0.4mm nozzle 0.28 layer creality ender 3 v3 se
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
This model repurposes the parts from the rather large Prusa Buddy 3D Camera, into a much smaller package more suitable for a 3D printer. The printed enclosure consists of 3 parts that snaps together, and no screws are needed. As this are…
Originally designed for the Makita LS1110F mitre saw and the Parkside PWD vacuum cleaner. Compatibility with other models is possible. Highly durable, simple design. Printing from PETG - perimeters only. Navrženo pro pokosovu pilu Makita…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
Pico4用バッテリー取り付けアタッチメント（Anker Nano Power BankおよびPD Reduxに対応）。固定は両面テープです。Battery attachment for Pico4 (compatible with Anker Nano Power Bank and PD Redux). Fixing is with double-sided tape. https://www.ankerjapan.com/products/a1653…
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
Compared to other floss picks, 3M ones are a bit longer, so I made the whole case taller. Also added guides inside to prevent picks from moving too much, and adjusted position and thickness of the spring clip to better push picks. Please…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
2 versions of a holder for a inferred remote for the gridfinity system
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
UPDATES: 28/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file included, can be cut via JLCCNC or sendcutsend. Removed sub250 1304 motors as an option and replaced…
Author: Shelly Kummer Brand: SK | SkyOrbit Year: 2026 License: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) You are free to: • Share — copy and redistribute the material in any medium or format • Adapt — remix,…
The “No Support” file has the keychain hole at the base at the plate The file without the support has the keychain hole centered and thus requires supports as it is a cantilever. Author: Shelly Kummer Brand: SK | SkyOrbit Year: 2026…
Red Skull | Head Sculpture | Exclusive Club Model. Thank you for your support. Semper Fidelis See All Club Models https://www.printables.com/@FreedomMaker/store Support and Licensing: If you would like to help support more free models or…
Dive into the world of League of Legends with this stunning collection of modular coasters ! Perfect for fans of the game, these coasters combine functionality with intricate designs inspired by Summoner’s Rift, iconic factions, and…
3D printable ACA P10 more is coming soon hope you like it.
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
Print it however you want. 0.30mm layer thickness and PLA filament recommended.
gift basket "Valentine" - two-colored for small and larger gifts - easy to scale, stackable The required parts Part 1 Part 2+3 Please glue the parts together at the marked points . here is a single-colored version: gift-basket “valentine”…
Make learning algebra hands-on and engaging with this Montessori-inspired bracket expansion puzzle! This physical representation of algebra was designed for upper elementary students (grades 4-6) . The purpose is to use physical shapes to…
From the begining the shed where used to store steam locomotves in case of an emergancy. Later the steam locomotives where decomissoned and where replaced with diesel engines. This sheds where found along the Swedish railway system,…
Simple Icosphere and Cube with positive X, Y, and Z labeled to test multicolored filaments. The filament used in the image is found on amazon: ZIRO Matte 3-in-1 Color Change PLA Filament Neon(https://a.co/d/fA17bS8). In the image I…
About the F-111 Aardvark The General Dynamics F-111 Aardvark is a retired supersonic, medium-range, multirole combat aircraft. Production models of the F-111 had roles that included attack (e.g. interdiction), strategic bombing (including…
Remixed from the coaster made by darkprojectworks The layer change happens in the 12th layer Original file: https://www.thingiverse.com/thing:6494547 Category: Keychains
A tiny simple hinge for parts no supports necessary use filament spools plastic as a hinge
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
Das ist ein Redesign des Fachwerkhauses von Zemizz https://www.thingiverse.com/thing:4314607 Vielen Dank dafür! Ich habe es anders aufgebaut und auch Kleinigkeiten verändert (z.B. die Position des Kamins) Gedruckt habe ich es in PLA mit…
I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
You'll need supports for the nose and maybe the eyes. One file has a drainage hole. You can print one of each or two of the same file. I have designed planters shaped like the other Pikmin. I'll post those when I'm allowed to post more…
I’ve created a remix of the Dummy 13, transforming it into a Mighty Morphin Power Ranger! The model is organized with pieces separated into folders by color for easier printing. It includes both a free-supported version and a 2-piece…
A quick remix of Retro Frog and Qjao to use with the baords from Aliexpress. print it with filament swap for extra flair!
For optimal results, i recommend printing the case with PETG, although PLA can also be used. After printing, simply apply double-sided tape to the printed part to ensure a secure attachment to your phone. Increase the number of bottom and…
Printed with Prusa MK4 Infill 15% Top and Bottom layer with hilbert curve (not required) PLA or PLA+ (but should work with every other material) Supports for drill holes are recommended
Original was cute, but 2mil polygons is a bit... excessive. Here's a 60k version, with virtually identical quality.
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
You might want to make it a little smaller but not too small, because as you can see in the images, the arms are a little wobbly. Happy printing!
The 3mf includes original model remixed with numbers to either side. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK
This is a set of pieces that can be used to recreate the Jawa - Tattered Shirt figure at 500% scale. This figure was introduced in 2018 and appeared in 4 sets between 2018 - 2021. All of the stl files needed to create this have been…
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
Algunos modelos las paredes vienen un poco mas gruesas y algunas son finas. me di cuenta que algunos modelos (módulos) son mas grande que otros los marque con (ORIFICIO NORMAL) (ORIFICIO GRANDE) hay muchos modelos de tapas de balde de 20L…
Update (Feb. 3, 2026): Improved heat insert holes for lid screws and improved vertical servo mount. Added screwing picture. Uploaded new versions of Housing_base and Housing_lid. Updated step file. Inspired by the Game No Man's Sky, I…
This remix is intended for spools vertically stacked and aligned . Filament can be threaded through the back with minimal to no bends. Prerequisites The font pictured is Transport Heavy , originally designed for street signs in the UK…
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
![[Remix] The Cat 2 (reduced)](https://media.printables.com/media/prints/1196366/images/8988611_9d515713-c22a-44bd-b2fb-0552f3d5ec4c_ed504f78-dddf-486d-98cf-c04d50395c0e/2025-02-17-22_18_15-kitty60k-orcaslicer.jpg)
![[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))](https://media.printables.com/media/prints/20b7aafb-fcc9-420b-af49-b4f14f45c301/images/10859124_8d45adaa-c782-4689-8a4b-a2aa0410be4b_e61b82b1-7094-44b6-8ae3-0af886071564/2025-10-09-23_49_25.jpg)
![IKEA SKÅDIS PTFE Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1210991/images/9092118_f6c76690-9ae0-4b13-a609-2cb82a2a4f4e_e2cfec0b-6583-4bc9-8155-14979512bb8e/20250228_183518jpg_compressed-photoroom.png)
![IKEA SKÅDIS PTFE Double Tube Holder Twist Lock Numbered [remix]](https://media.printables.com/media/prints/1217861/images/9140018_3f0b859a-a727-47f2-9cc1-54fc78b8ad16_c6a52c84-e2fb-4002-95f9-0a532296c02a/20250305_210901jpg_compressed-photoroom.png)
