Phone Stand - Prusa-Style Filament Spool - No Multicolor Required

DESCRIPTION
A clean, modern phone stand inspired by the iconic filament spool design. Built for makers who want something functional, but also visually on point for a solid desk setup.

The stand features integrated precision cut slots that hold the spool securely in place. This means you can use it straight after printing, without gluing anything. The fit is stable by design.

If you want a more permanent assembly, you can apply a very small amount of superglue inside those slots. This locks the spool in place without affecting the overall look.

The spool itself is designed to be printed in two separate parts. You will need to split (cut) the model in your slicer. Once printed, the two halves can be joined easily.
For an even tighter and more rigid connection, you can add small connectors or alignment pins between the parts, depending on your preference.

This model is optimized for single-extruder printers. No multi-material system required. You still get a multi-part aesthetic without extra complexity.

KEY FEATURES

• Smart slot-fit system. No glue required

• Optional glue for permanent assembly

• Spool printed in 2 parts for easier printing

• Compatible with single-extruder printers

• Clean honeycomb structure for strength and reduced material use

• Stable support for most smartphones

• Perfect for desk setups, calls, or content viewing

PRINT SETTINGS (RECOMMENDED)

• Material: PETG or PLA

• Layer height: 0.2 mm

• Walls: 2 perimeters

• Infill: 15–20%

• Supports: Not required

• Brim: Optional (for extra bed adhesion)

• Orientation: Print as designed for best strength

PRINT TUNING (FOR BEST RESULTS)

• Lower outer wall speed for cleaner finish

• Align seam to the back side

ASSEMBLY NOTES

• The spool sits into dedicated cut slots in the stand

• Can be used without glue

• Optional: add a small drop of superglue in the slots for a fixed setup

• Spool is printed in 2 parts

• Cut the spool model accordingly before printing

• Optional: use connectors or pins for a tighter fit between spool halves

DIMENSIONS

• Phone slot: approx. 12–15 mm (fits most phones and cases)

• Spool diameter: aesthetic design element (non-functional)

USE CASE

• Desk organization

• Video calls

• Media viewing

• Clean aesthetic upgrade for your workspace

FINAL NOTE
Designed to look sharp. Designed to print easy.
You hit print and it just works.