PolyDryer Extra Desiccant Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a funnel to allow easier filling of the excellent PolyDryer Extra Desiccant container model by @hexvolt_2112920
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 99
- Wydruki
- 2
- Wyświetlenia
- 288
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created from scratch to fit the PolyDryer Extra Desiccant Container to allow easier refilling of dessicant.
I loved the excellent extra dessicant container by @hexvolt_2112920 but filling with dessicant was tricky so I made this robust little funnel to assist with the job.
It slots/hooks into the container snugly but when filling its advisable to hold the container to avoid the risk of it toppling over.
Prints easily without support at 0.2mm or greater layers in most common fillaments (PLA, PETG, ABS. ASA)