Attachment for Motor (2 mm Rotor Shaft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment designed to securely mount a motor, easy to print and integrate into custom projects.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A simple motor attachment designed to fit motors with a 2 mm rotor shaft.
This part can be used to connect or mount accessories to small motors where a 2 mm shaft interface is required.
📌 Model Details
Name: Attachment for Motor
Fits: Motors with 2 mm rotor shaft
Purpose: Attachment / accessory interface piece
Parts: 1 STL file
Intended Use: Mechanical attachment component for motor setups
🛠 Print Settings (Recommended)
General Print Settings
Layer Height: 0.10 mm (for fine detail)
Nozzle: 0.40 mm
Supports: Not specified (use only if necessary)
Material: PLA recommended (PETG/ABS if durability needed)
Infill: ~20–30%
Printer Notes
Designed to print cleanly with fine detail at 0.10 mm slice.