Prusa XL Nozzle Wiper | Bambu Lab Silicone Brush, M4 Hardware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sits below each Prusa XL tool head to wipe the nozzle on every tool change. Uses M4 hardware and a silicone brush.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
What it is
A Prusa XL nozzle wiper that uses standard M4 hardware and a Bambu Lab silicone nozzle brush. It's placed below each nozzle, so on every tool change the nozzle glides over the brush and gets wiped. I made it for the printer we had at work.
Hardware (all of it can be found on Amazon)
2 M4 screws per wiper. Machine Screw Assortment Kit: https://amzn.to/4ntjbA5
2 M4 T-nuts per wiper, to mount it to the aluminum extrusion: https://amzn.to/4hw8njj
Bambu Lab silicone nozzle brush: https://amzn.to/4hBxaTc
You'll need one wiper for each tool head.
Print settings
Material: I recommend PETG or a higher-temp plastic
0.2 mm layer height
3 walls/perimeters
10% infill (any pattern)
No supports needed
Files: Wiper Mount (STL) and Wiper Mount (STEP).
Feel free to leave any questions or suggestions in the comments. Thank you!