Qidi Plus 4 R3men Graphite Bed Corner Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
R3men Graphite bed for a Qidi Plus 4 is thicker than the stock one. It needs higher build sheet alignment corner guides
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
R3men Graphite Bed for Qidi Plus 4 is now available for ordering at www.R3men.com
The graphite bed is 8mm thick, so for more convenient build sheet alignment you can print out these alignment corner guides prior to bed replacement.
Make sure that the tolerance is good, cuz it is a tight fit. It is recommended to print it is CF reinforced filament for better tolerance. We used PC-CF, but PP-CF and PA-CF must work well too. Not tried ABS-CF. Do not print it in PLA or PETG.
Print it in the standing orientation just like it opens in the slicer.
Step files attached so you can adjust the design to your liking.