Schiit Magni Knob Replacement (15 mm Schiit Knobs) Daemon Xar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for Schiit Magni/Loki/Piety/Vali
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I much prefer the knobs on full-sized Schiit products like Jotunheim and Asgard to the Magni/Piety/Loki/Vali line, and I wanted to replace the knobs on my smaller Schiit products. I designed a printable sleeve to slip over the existing knobs.
There are two variants; 1) is just a PLA/etc. shell that slides over the existing knob with a friction fit, and 2) is a TPU sleeve that fits over the OEM knob and a PLA sleeve that fits over the TPU for a firmer fit. I have added a notch on the top to show the volume position (like the Jotunheim) rather than painting one; it would be easy enough to add color to the notch but will substantially slow the print for single-headed printers.
I printed both face down with 3 bottom layers and the Hilbert curve option on a patterned Smooth PEI plate to avoid layer issues. The sleeve is printed in TPU 95A.
I did a version of this for the 17 mm knob models (Magnius, Lokius, etc.) available here: https://makerworld.com/en/models/1935413-schiit-magnius-knob-replacement-all-17-mm-models#profileId-2078051