TRMNL 7.5" (OG) DIY Kit Wall Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the Seeed Studio TRMNL 7.5" (OG) DIY Kit for wall mounting. No screws or adhesives needed.
- Ocena
- 4 / 5
- Polubienia
- 31
- Pobrania
- 436
- Wydruki
- 3
- Wyświetlenia
- 2507
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the my 3D-printed enclosure for the TRMNL 7.5" (OG) DIY Kit, which is co-developed by Seeed Studio and TRMNL. It requires no adhesive or screws as it is designed to be press-fit together. All buttons are usable with the case and the on/off switch can be moved with a pointed object like a pencil or screw drive (I wanted it protected).
The kit from Seeed studio is described as follows: “A 7.5-inch 800×480 monochrome e-ink display, XIAO ESP32-S3 PLUS driver board, 2000 mAh rechargeable battery, and 10cm FPC extension cable. Fully compatible with the TRMNL BYOD ecosystem, this kit enables no-code dashboard building with over 375 plugins and 8 layouts, ideal for DIY enthusiasts, smart home interfaces , and creative digital signage. ”
Only two parts are printed but I have included my models for the board and screen to help others create their own.