Verschlussriegel für fischertechnik
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the fischertechnik construction toy part no. 37232 - Verschlussriegel. I also added a re-…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement for the fischertechnik construction toy part no. 37232 - Verschlussriegel.
I also added a re-design with hexagonal 8mm head and a nut wrench for the redesigned part.
Print Settings
Printer:
Anycubic I3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
By experience I would recommend to raise the print temperature to the upper range given for your filamen.
Also, a very slightly increased flow rate (1% or so) might help to increase layer adhesion.
My standard settings for the PETG used are 220°C and 103% filament flow, which resulted in parts that broke at the transition between head and shaft.
I ended up with 245°C (exceeding the proposed range of 210-230°C) and 104% flow rate, resulting in parts that actually lasted.
Category: Construction Toys