Verschlussriegel für fischertechnik
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the fischertechnik construction toy part no. 37232 - Verschlussriegel. I also added a re-…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement for the fischertechnik construction toy part no. 37232 - Verschlussriegel.
I also added a re-design with hexagonal 8mm head and a nut wrench for the redesigned part.
Print Settings
Printer:
Anycubic I3 Mega
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
By experience I would recommend to raise the print temperature to the upper range given for your filamen.
Also, a very slightly increased flow rate (1% or so) might help to increase layer adhesion.
My standard settings for the PETG used are 220°C and 103% filament flow, which resulted in parts that broke at the transition between head and shaft.
I ended up with 245°C (exceeding the proposed range of 210-230°C) and 104% flow rate, resulting in parts that actually lasted.
Category: Construction Toys