Pushup Parallettes with TPU antislip feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pushup Parallette for training. You get a good and stable grip.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing:
These Parallettes use a 40mm dowel from the hardware store as th grip. I printed them in basic PLA with 4 top and bottoms 2 walls and 15% infill. I tested them up to 85 kg. The pad gets printed in TPU with 4 bottom layers, no top layers, 2 walls and a high density infill of your liking (50%-80%). I printed everithing with a 0,6mm nozzle, use more walls if you use a 0,4mm nozzle. They took around 400g of Filament.
Assembly:
8x Woodscrew with a diameter of 4mm. Lenth 40+mm. Predrill the holes using the Print as a template. align the second sideplate by setting everything on a table.
The anti slip feet get glued to the sidepieces.
Disclaimer:
i tested the Parallettes to my Bodyweight ( also with Weights). If youre heavier or your Print or Filament is different, the printed parts could fail ( mine feel really solid, just in case ;) )