Pushup Parallettes with TPU antislip feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pushup Parallette for training. You get a good and stable grip.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 16
- Makes
- 1
- Views
- 170
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing:
These Parallettes use a 40mm dowel from the hardware store as th grip. I printed them in basic PLA with 4 top and bottoms 2 walls and 15% infill. I tested them up to 85 kg. The pad gets printed in TPU with 4 bottom layers, no top layers, 2 walls and a high density infill of your liking (50%-80%). I printed everithing with a 0,6mm nozzle, use more walls if you use a 0,4mm nozzle. They took around 400g of Filament.
Assembly:
8x Woodscrew with a diameter of 4mm. Lenth 40+mm. Predrill the holes using the Print as a template. align the second sideplate by setting everything on a table.
The anti slip feet get glued to the sidepieces.
Disclaimer:
i tested the Parallettes to my Bodyweight ( also with Weights). If youre heavier or your Print or Filament is different, the printed parts could fail ( mine feel really solid, just in case ;) )