Chinese checkers board, 14mm marbles, portable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chinese checkers board printed from 6 identical pieces. Can be connected with magnets, dowels, or glue.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Using the magnet design, this board breaks down very compactly and can be stored in a bag. You can also use dowels or just glue for a more permanent shape.
I suggest printing these two at a time in 3 total colors so each player starts and ends on the same color.
Magnet version. Use 1/8"x1/8" cylindrical magnets to connect the pieces. Ream to 0.123" for a press fit or to 0.125" for glue. To be absolutely sure the parts are interchangeable, I made sure all the magnets were oriented the same direction on each piece. I made a stack then press each in the same direction into the same hole on each part. Then I paired magnets carefully. It helps to have a rule like ‘N’ points right and then have a master magnet with North marked in Sharpie.
You can also do 1/8" x ¼" dowels or just glue the sections together.
Credit where it's due: I got the idea for the honeycomb style from a design on Cults by ExMachinaFabLab. I did my model from scratch, but the aesthetics ended up very similar. Their design has a separate center and 6 triangle ends and is made for larger marbles. If you like how that would look, go check theirs out. I bought it out of respect for their artistry, but felt my design was different and interesting enough to warrant posting.