Chinese checkers board, 14mm marbles, portable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chinese checkers board printed from 6 identical pieces. Can be connected with magnets, dowels, or glue.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Using the magnet design, this board breaks down very compactly and can be stored in a bag. You can also use dowels or just glue for a more permanent shape.
I suggest printing these two at a time in 3 total colors so each player starts and ends on the same color.
Magnet version. Use 1/8"x1/8" cylindrical magnets to connect the pieces. Ream to 0.123" for a press fit or to 0.125" for glue. To be absolutely sure the parts are interchangeable, I made sure all the magnets were oriented the same direction on each piece. I made a stack then press each in the same direction into the same hole on each part. Then I paired magnets carefully. It helps to have a rule like ‘N’ points right and then have a master magnet with North marked in Sharpie.
You can also do 1/8" x ¼" dowels or just glue the sections together.
Credit where it's due: I got the idea for the honeycomb style from a design on Cults by ExMachinaFabLab. I did my model from scratch, but the aesthetics ended up very similar. Their design has a separate center and 6 triangle ends and is made for larger marbles. If you like how that would look, go check theirs out. I bought it out of respect for their artistry, but felt my design was different and interesting enough to warrant posting.