1 / 3
Battery Adapter Womax For 20 Volt 4000 mAh flat basic — zdjęcie 1
1 / 3

Battery Adapter Womax For 20 Volt 4000 mAh flat basic

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery Adapter Womax For 20 Volt 4000 mAh flat basic the cheaper one.

Ocena
0 / 5
Polubienia
4
Pobrania
30
Wydruki
0
Wyświetlenia
191
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

A dry wall metal supports are good alternative for metal sheet , for contacts.

Solder metal contact outside of plastic adapter and then insert in print . A 60 Watts or higher soldering iron is a good idea.

Some tools need a third pin that detect battery temperature , a work around is to use 10 000 ohms ( 10K ) ¼ Watts , connect betwine signal wire third one ( middle connection ) and battery minus usually, some use plus connection , so try with which one works . it is a 10 000 ohms resistor very very little chances of shorting something.

Once inserted a 3d printer pencil or a glue gun are good for securing connections.

Tagi