Fire Hydrant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini model of a Fire Hydrant with threaded caps to allow for different color combinations.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mini model of a Fire Hydrant with threaded caps to allow for different color combinations. Red and Silver seem to be the most common but I've also seen yellow, green, orange and blue. Make one to match your local colors or try something new.
Total Height 120 mm, Base Diameter 50 mm
The main body has female threads and each cap has male threads. Fresh off the printer the threads can be a little sticky. A few minutes of twisting and untwisting the parts together will give it a much smoother feel.
DIY Add-on:
The bottom has spaces designed to fit 10x2 mm cylindrical magnets (Amazon Link) . The intention was to make it feel heavy but it's not as strong as I originally wanted. Easiest way to glue them in is by placing the bottom cap on a magnetic surface first so the magnets don't snap together.
Print Settings:
Nozzle: 0.4 mm
Layer Height: 0.2 mm
Infill: 15% Gyroid
Wall loops: 3
Supports: Tree (auto)
Printed with: Silky Red & Silky Silver PLA