Elegoo Centauri Carbon GT2 Gantry - JLC version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Remix of the original Gantry Mod, clearanced for Parts aviable via JLCMC
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 885
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Background
Since JLCMC was my only alternative to AliExpress to order the right sized shafts at a reasonable price, I ordered the whole parts package there to reduce costs.
The toothed Idlers fit fine but the smooth ones didn't fit at all. I widened the channels and reduced the alignment ridges to ensure smooth operation while retaining a centered position without the need for sanding.
I recommend to drill out the shaft holes with a 5mm drill bit to make insertion easier.
Inserting the Idlers will require more force than seems right but once they sit in place, they should rotate freely.
BOM
Print Settings
Material: ASA
Precise Wall: On
Precise Z Height: On
Walls: 4
Alternate Extra Wall: On
Top & Bottom Layers: 5
Infill: 15%, Adaptive Cubic
Tree Supports
Mouse Ears
Disclaimer
I am not affiliated with JLCMC in any capacity. I just like using a centralized supplier for projects like this without spending inconsiderable amounts.
Any Links provided are NOT affiliate Links.