1 / 2
Evolve GTR Skateboard All-Terrain 175mm Wheel Fenders (Mud Guards) — zdjęcie 1
1 / 2

Evolve GTR Skateboard All-Terrain 175mm Wheel Fenders (Mud Guards)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Front and rear fenders for the 175mm Evolve GTR Skateboard.

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The Story

This is a memorial for a work friend's evolve GTR all terrain skateboard. These skateboards look seriously cool (https://www.rideevolve.com.au). I don't have the talent or balance to ride one but he does. We spent some time designing fenders for the 175mm model - front and back - and this thing looked seriously cool! See the video below for him zooming around the street. Unfortunately, his car was broken into and someone stole the bamboo GTR skateboard complete with custom fenders. The skateboard is yet to be recovered. I would have loved to print them in carbon fibre on the bamboo board it would have looked amazing.

 

Materials

Printing

This can be tricky given the parts were designed for fit, function and appearance and need supports

  • Print with support; oriented rim down; this will optimise the external surface
  • Mirror the fender in your slicer to print the opposite side
  • 0.4mm nozzle, 0.2mm layer height, 40% infill and use a plastic that's UV resistant
  • For TPU fenders print using a toolchanger with PLA support

Installation

Use these fenders at your own risk. Installation may void warranty. No responsibility is taken for skateboard damage, injury or skateboard theft.

Front Fenders

  1. Feed the 2 tube clamps around the slot, you may need to bend the hose clamp to have the right curve before you start. Don't close them yet
  2. Place the fender on the front axle and secure the tube clamps with the support bracket, paying attention to the camber of the axle

Rear Fenders

  1. Remove the plastic motor cover by removing the 2x M6 bolts
  2. Install the fender in place of the motor cover with the existing M6 bolts
  3. Rigid fenders may require the rear wheels to be removed.

Enjoy

One replacement skateboard:

 

Tagi