Toothbrush Holder for the Ukraine V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The people don't have time to make toothbrush holders, but, if they did, they would be like this !!!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
If you have not done so already, please donate to one of the funds supporting this cause : https://donation.dec.org.uk/ukraine-humanitarian-appeal
What can I tell you about this print. I wanted it to have something of the Ukrainian flag and logo, be a bit different and, in some way, encapsulate how tough and clever they are as a people. The idea for this just appeared in my brain a week ago.
It can be folded flat for travel .
I've made it with 0.4mm ish tolerances so as long as you can bridge ok all should be well with the upper and lower moving parts. This version will need a few supports underneath the 3 legs of the arm. I will post an additional version that has the arm flat on the build plate that can then just slot into the hinge. I have an issue with fusion 358 at the moment not doing combines correctly I need to fix :) It's the only fight i've been having though !
I have also just added 2 corner tabs that you can add some custom supports under just cut away after printing these do a good job of making it stable.
Scale wise, it was designed wih a (z) height of 150mm but the larger tolerances i've built in should see you ok down to z100mm if you want it smaller. At 100mm it's ~3h at medium (40-60mmsec) speed.
Feedback very much appreciated and will be baked back into the design quickly this is one of my first f360 / print in place / a 'bit arty' models so please excuse any gaffs i've made !