Toothbrush Holder for the Ukraine V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The people don't have time to make toothbrush holders, but, if they did, they would be like this !!!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 15
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
If you have not done so already, please donate to one of the funds supporting this cause : https://donation.dec.org.uk/ukraine-humanitarian-appeal
What can I tell you about this print. I wanted it to have something of the Ukrainian flag and logo, be a bit different and, in some way, encapsulate how tough and clever they are as a people. The idea for this just appeared in my brain a week ago.
It can be folded flat for travel .
I've made it with 0.4mm ish tolerances so as long as you can bridge ok all should be well with the upper and lower moving parts. This version will need a few supports underneath the 3 legs of the arm. I will post an additional version that has the arm flat on the build plate that can then just slot into the hinge. I have an issue with fusion 358 at the moment not doing combines correctly I need to fix :) It's the only fight i've been having though !
I have also just added 2 corner tabs that you can add some custom supports under just cut away after printing these do a good job of making it stable.
Scale wise, it was designed wih a (z) height of 150mm but the larger tolerances i've built in should see you ok down to z100mm if you want it smaller. At 100mm it's ~3h at medium (40-60mmsec) speed.
Feedback very much appreciated and will be baked back into the design quickly this is one of my first f360 / print in place / a 'bit arty' models so please excuse any gaffs i've made !