ALU Ultimarc AimTrak Sensor Mount Clean Install
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Install your AimTrak sensor to your ALU with an OEM look.This is a re-work of mcsterls' AimTrak lightgun bracket for…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Install your AimTrak sensor to your ALU with an OEM look.
This is a re-work of mcsterls' AimTrak lightgun bracket for the AtGames Legends Ultimate (ALU) gaming console. The original bracket and bezel can be found here - https://www.thingiverse.com/thing:4689305.
I had trouble calibrating both guns with the above sensor bracket. After using a laptop to troubleshoot the issue, I found the angle of the sensor was off and the guns couldn't see the sensor for the bottom 3-4 inches of screen.
With this bracket and the original bezel, the guns calibrate perfectly and works well for the adults and children in the home. Looks like OEM once done!
I used two types of double sided tape for this project. Bezel (optional - I already had this) - https://www.amazon.com/gp/product/B0817HZN4L Bracket and other components - https://www.amazon.com/gp/product/B07YB1ZXG6?th=1
*Calibration tip: Don't even bother with the built in ALU AimTrak calibration tool. This isn't needed because the calibration settings are on the gun, not the ALU. I found it much easier to calibrate with a laptop using the AimTrak utility. This allows easy sensor bar troubleshooting and you can see the calibration settings.
Category: Other