ALU Ultimarc AimTrak Sensor Mount Clean Install
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Install your AimTrak sensor to your ALU with an OEM look.This is a re-work of mcsterls' AimTrak lightgun bracket for…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Install your AimTrak sensor to your ALU with an OEM look.
This is a re-work of mcsterls' AimTrak lightgun bracket for the AtGames Legends Ultimate (ALU) gaming console. The original bracket and bezel can be found here - https://www.thingiverse.com/thing:4689305.
I had trouble calibrating both guns with the above sensor bracket. After using a laptop to troubleshoot the issue, I found the angle of the sensor was off and the guns couldn't see the sensor for the bottom 3-4 inches of screen.
With this bracket and the original bezel, the guns calibrate perfectly and works well for the adults and children in the home. Looks like OEM once done!
I used two types of double sided tape for this project. Bezel (optional - I already had this) - https://www.amazon.com/gp/product/B0817HZN4L Bracket and other components - https://www.amazon.com/gp/product/B07YB1ZXG6?th=1
*Calibration tip: Don't even bother with the built in ALU AimTrak calibration tool. This isn't needed because the calibration settings are on the gun, not the ALU. I found it much easier to calibrate with a laptop using the AimTrak utility. This allows easy sensor bar troubleshooting and you can see the calibration settings.
Category: Other